EUVIMEDEUVIMED entdecken
Crossref

Determining Crack Extension Resistance of Concrete for a Four‐Point Bending Beam

Yangyang Yin, Xingyu Cao, Shaowei Hu, Chaofeng Liang, Shunxiang Wang, Jueding Liu, Gang Hou

Fatigue & Fracture of Engineering Materials & Structures · 2026-04 · 49 (4) · 1523-1538

DOI: 10.1111/ffe.70176 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 01.02.2026. Verfasst von Yangyang Yin und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 73 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fracture behavior of concrete was studied by using four‐point bending (4PB) tests. Analytical expressions for the crack extension resistance ( K R ) of 4PB beam were formulated. Experiments were conducted on 4PB specimens with initial crack–depth ratios of 0.2, 0.3, 0.4, 0.5, and 0.6. The crack growth during loading was monitored using the digital image correlation (DIC) technique. Strain gauges were employed to capture the initial cracking load. The evaluations of fracture process zone (FPZ), K R ‐curves, and crack tip opening displacement ( CTOD ) during the whole fracture process were analyzed. The results indicated that with the crack–depth ratio increasing from 0.2 to 0.6, the initial load and maximum load decreased by 57.2% and 63.9%, respectively, while the maximum FPZ length decreased by 44.6%. The K R ‐curves started from the initial crack toughness, which showed a slight fluctuation for each group, and increased with the effective crack extension. Coupling with the DIC results, the horizontal opening displacement decreased as the section moved upward, and increasing the span–depth ratio resulted in a decrease of the extended crack length and CTOD . The measured CTOD values and crack extension length showed good consistency with the calculated ones.

Förderung

  • China Postdoctoral Science Foundation
  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Yin, Y., Cao, X., Hu, S., Liang, C., Wang, S., Liu, J., & Hou, G. (2026). Determining Crack Extension Resistance of Concrete for a Four‐Point Bending Beam. Fatigue & Fracture of Engineering Materials & Structures, 49(4), 1523-1538. https://doi.org/10.1111/ffe.70176

Vancouver

Yin Y, Cao X, Hu S, Liang C, Wang S, Liu J, et al. Determining Crack Extension Resistance of Concrete for a Four‐Point Bending Beam. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(4):1523-1538. doi:10.1111/ffe.70176

BibTeX
@article{Yin2026,
  author = {Yin, Yangyang and Cao, Xingyu and Hu, Shaowei and Liang, Chaofeng and Wang, Shunxiang and Liu, Jueding and Hou, Gang},
  title = {Determining Crack Extension Resistance of Concrete for a Four‐Point Bending Beam},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2026},
  volume = {49},
  number = {4},
  pages = {1523--1538},
  doi = {10.1111/ffe.70176}
}
Kostenlos starten →