Mechanism of Fatigue Crack Closure in Steel Under High‐Density Pulsed Current
Fatigue & Fracture of Engineering Materials & Structures · 2025-04 · 48 (4) · 1879-1892
DOI: 10.1111/ffe.14579 ↗At a glance
Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2025-02-03. Written by Shota Nakayama and 6 co-authors. Cited 7 times so far (Crossref); 18 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Japan Society for the Promotion of Science.
Abstract (original language)
This study is aimed at clarifying the mechanism of effectively healing fatigue cracks in steel; austenitic stainless steel, SUS304; and hot work tool steel, SKD61, using high‐density pulsed current. The results show that the current concentration occurred at the crack tip for SUS304, and crack closure was observed near the fatigue crack tip. On the other hand, crack closure was observed at the notch tip in SKD61. The fatigue crack closure phenomena were verified by finite element analysis, revealing that contact pressure was applied behind the crack tip owing to local bending deformation associated with residual stress near the crack tip. For effective crack healing, it is necessary to bond the interface leveraging compressive stress and Joule heat generated at the crack tip during current application.
Funding
- Japan Society for the Promotion of Science
Cite
APA
Nakayama, S., Sugeno, Y., Kambayashi, T., Hosoi, A., Furukawa, Y., Tomita, T., & Kawada, H. (2025). Mechanism of Fatigue Crack Closure in Steel Under High‐Density Pulsed Current. Fatigue & Fracture of Engineering Materials & Structures, 48(4), 1879-1892. https://doi.org/10.1111/ffe.14579
Vancouver
Nakayama S, Sugeno Y, Kambayashi T, Hosoi A, Furukawa Y, Tomita T, et al. Mechanism of Fatigue Crack Closure in Steel Under High‐Density Pulsed Current. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(4):1879-1892. doi:10.1111/ffe.14579
BibTeX
@article{Nakayama2025,
author = {Nakayama, Shota and Sugeno, Yutaro and Kambayashi, Tomoto and Hosoi, Atsushi and Furukawa, Yuichi and Tomita, Takashi and Kawada, Hiroyuki},
title = {Mechanism of Fatigue Crack Closure in Steel Under High‐Density Pulsed Current},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2025},
volume = {48},
number = {4},
pages = {1879--1892},
doi = {10.1111/ffe.14579}
}
EUVIMED