EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Mechanism of Fatigue Crack Closure in Steel Under High‐Density Pulsed Current

Shota Nakayama, Yutaro Sugeno, Tomoto Kambayashi, Atsushi Hosoi, Yuichi Furukawa, Takashi Tomita, Hiroyuki Kawada

Fatigue & Fracture of Engineering Materials & Structures · 2025-04 · 48 (4) · 1879-1892

DOI: 10.1111/ffe.14579 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 03.02.2025. Verfasst von Shota Nakayama und 6 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Japan Society for the Promotion of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study is aimed at clarifying the mechanism of effectively healing fatigue cracks in steel; austenitic stainless steel, SUS304; and hot work tool steel, SKD61, using high‐density pulsed current. The results show that the current concentration occurred at the crack tip for SUS304, and crack closure was observed near the fatigue crack tip. On the other hand, crack closure was observed at the notch tip in SKD61. The fatigue crack closure phenomena were verified by finite element analysis, revealing that contact pressure was applied behind the crack tip owing to local bending deformation associated with residual stress near the crack tip. For effective crack healing, it is necessary to bond the interface leveraging compressive stress and Joule heat generated at the crack tip during current application.

Förderung

  • Japan Society for the Promotion of Science

Zitieren

APA

Nakayama, S., Sugeno, Y., Kambayashi, T., Hosoi, A., Furukawa, Y., Tomita, T., & Kawada, H. (2025). Mechanism of Fatigue Crack Closure in Steel Under High‐Density Pulsed Current. Fatigue & Fracture of Engineering Materials & Structures, 48(4), 1879-1892. https://doi.org/10.1111/ffe.14579

Vancouver

Nakayama S, Sugeno Y, Kambayashi T, Hosoi A, Furukawa Y, Tomita T, et al. Mechanism of Fatigue Crack Closure in Steel Under High‐Density Pulsed Current. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(4):1879-1892. doi:10.1111/ffe.14579

BibTeX
@article{Nakayama2025,
  author = {Nakayama, Shota and Sugeno, Yutaro and Kambayashi, Tomoto and Hosoi, Atsushi and Furukawa, Yuichi and Tomita, Takashi and Kawada, Hiroyuki},
  title = {Mechanism of Fatigue Crack Closure in Steel Under High‐Density Pulsed Current},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2025},
  volume = {48},
  number = {4},
  pages = {1879--1892},
  doi = {10.1111/ffe.14579}
}
Kostenlos starten →