EUVIMEDDescoperă EUVIMED
Crossref

Influence of Laser‐Assisted Cutting on the Surface Integrity and Fatigue Life of FeCoCrNiAl 0.6 High‐Entropy Alloy

Ping Zhang, Zhenyong Lin, Tengfei Zhang, Changyin Lan, Xiaomin Jiang

Fatigue & Fracture of Engineering Materials & Structures · 2025-04 · 48 (4) · 1806-1818

DOI: 10.1111/ffe.14576 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2025-01-29. Written by Ping Zhang and 4 co-authors. 47 references. Funded by: National Natural Science Foundation of China.

RezumatDate bibliograficeCiteRelated studies

Abstract (original language)

This study explores the application of laser‐assisted cutting (LAC) in FeCoCrNiAl 0.6 high‐entropy alloys to address traditional machining challenges and poor surface quality. It systematically analyzes the effects of laser power, scan speed, and spot diameter on surface integrity and fatigue life. Using Abaqus/FE‐SAFE simulations and LAC experiments, differences in surface quality and fatigue cycles under various laser parameters are observed. Results show that increasing the spot radius reduces heat accumulation and center temperature. A 1 mm radius yields a center temperature 5.58 times higher than a 7 mm radius and achieves a residual compressive stress of 412 MPa, which decreases to 198 MPa (51.9% reduction) at 7 mm. Larger laser power increases stress and fatigue life positively, while higher scan speeds reduce stress. Fatigue cycles drop by 82.9% as the spot radius increases from 1 to 7 mm, while 25 W power extends fatigue life 4.26 times compared to 10 W.

Funding

  • National Natural Science Foundation of China

Cite

APA

Zhang, P., Lin, Z., Zhang, T., Lan, C., & Jiang, X. (2025). Influence of Laser‐Assisted Cutting on the Surface Integrity and Fatigue Life of FeCoCrNiAl 0.6 High‐Entropy Alloy. Fatigue & Fracture of Engineering Materials & Structures, 48(4), 1806-1818. https://doi.org/10.1111/ffe.14576

Vancouver

Zhang P, Lin Z, Zhang T, Lan C, Jiang X. Influence of Laser‐Assisted Cutting on the Surface Integrity and Fatigue Life of FeCoCrNiAl 0.6 High‐Entropy Alloy. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(4):1806-1818. doi:10.1111/ffe.14576

BibTeX
@article{Zhang2025,
  author = {Zhang, Ping and Lin, Zhenyong and Zhang, Tengfei and Lan, Changyin and Jiang, Xiaomin},
  title = {Influence of Laser‐Assisted Cutting on the Surface Integrity and Fatigue Life of FeCoCrNiAl 0.6 High‐Entropy Alloy},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2025},
  volume = {48},
  number = {4},
  pages = {1806--1818},
  doi = {10.1111/ffe.14576}
}
Start for free →