EUVIMEDAtrasti EUVIMED
Crossref

Fatigue Short Crack Growth Prediction of Additively Manufactured Alloy Based on Ensemble Learning

Qinghui Huang, Dianyin Hu, Rongqiao Wang, Ivan Sergeichev, Jingyu Sun, Guian Qian

Fatigue & Fracture of Engineering Materials & Structures · 2025-04 · 48 (4) · 1847-1865

DOI: 10.1111/ffe.14573 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2025-02-02. Written by Qinghui Huang and 5 co-authors. Cited 10 times so far (Crossref); 51 references. Funded by: National Natural Science Foundation of China.

SantraukaBibliografiniai duomenysCiteRelated studies

Abstract (original language)

In situ fatigue crack propagation experiment was conducted on laser cladding with coaxial powder feeding (LCPF) K477 under various stress ratios and temperatures. Multiple crack initiation sites were observed by using in situ scanning electron microscopy (SEM). The fatigue short crack growth rate was measured, and the impacts of temperature and stress ratio on this growth rate were analyzed. Based on these experiments, the experimental data were expanded, and three ensemble learning algorithms, that is, random forest (RF), extreme gradient boosting (XGBoost), and light gradient boosting machine (LightGBM), were employed to establish a fatigue short crack growth rate model controlled by multiple parameters. It is indicated that the RF model performs the best, achieving a coefficient of determination ( R 2 ) of up to 0.88. The fatigue life predicted by the machine learning (ML) method agrees well with the experimental one.

Funding

  • National Natural Science Foundation of China

Cite

APA

Huang, Q., Hu, D., Wang, R., Sergeichev, I., Sun, J., & Qian, G. (2025). Fatigue Short Crack Growth Prediction of Additively Manufactured Alloy Based on Ensemble Learning. Fatigue & Fracture of Engineering Materials & Structures, 48(4), 1847-1865. https://doi.org/10.1111/ffe.14573

Vancouver

Huang Q, Hu D, Wang R, Sergeichev I, Sun J, Qian G. Fatigue Short Crack Growth Prediction of Additively Manufactured Alloy Based on Ensemble Learning. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(4):1847-1865. doi:10.1111/ffe.14573

BibTeX
@article{Huang2025,
  author = {Huang, Qinghui and Hu, Dianyin and Wang, Rongqiao and Sergeichev, Ivan and Sun, Jingyu and Qian, Guian},
  title = {Fatigue Short Crack Growth Prediction of Additively Manufactured Alloy Based on Ensemble Learning},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2025},
  volume = {48},
  number = {4},
  pages = {1847--1865},
  doi = {10.1111/ffe.14573}
}
Start for free →