EUVIMEDAtrasti EUVIMED
Open access · CC BY-NC-ND 4.0

Adhesively Bonded Composite Patch Repair in Load‐Bearing Applications for the Aviation Industry: Manufacturing, Design, and Simulation

P. H. E. Fernandes, M. Baumert, S. Dieckhoff, C. Nagel, V. C. Beber

Fatigue & Fracture of Engineering Materials & Structures · 2025-04 · 48 (4) · 1447-1460

DOI: 10.1111/ffe.14552 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2025-01-08. Written by P. H. E. Fernandes and 4 co-authors. Cited 3 times so far (Crossref); 48 references. The full text is freely available (open access, CC BY-NC-ND 4.0).

SantraukaBibliografiniai duomenysCiteRelated studies

Abstract (original language)

Four adhesively bonded composite patch repairs are considered: with one and two double CFRP layers and with scarf ratios of 1:15 and 1:30. Prepregs are applied to an artificially cracked aluminum plate and bonded using a film adhesive. Considering curing‐induced deflection of patches, samples with two double CFRP layers and a scarf ratio of 1:15 exhibit the highest deflection, while the patch with one double CFRP layer and a scarf ratio of 1:30 shows the lowest deflection. FE simulations align with experimental results showing deviations between −3% and +16%. Fatigue results of crack length as function of cycles reveal that patched samples have longer lifetimes (3.2–4.3 times) compared to nonpatched samples. Among patched samples, those with two double CFRP layers and a scarf ratio of 1:15 provide approximately 20% and 8% longer service life compared to counterparts with one double CFRP layer and a scarf ratio of 1:30, respectively.

Cite

APA

Fernandes, P. H. E., Baumert, M., Dieckhoff, S., Nagel, C., & Beber, V. C. (2025). Adhesively Bonded Composite Patch Repair in Load‐Bearing Applications for the Aviation Industry: Manufacturing, Design, and Simulation. Fatigue & Fracture of Engineering Materials & Structures, 48(4), 1447-1460. https://doi.org/10.1111/ffe.14552

Vancouver

Fernandes PHE, Baumert M, Dieckhoff S, Nagel C, Beber VC. Adhesively Bonded Composite Patch Repair in Load‐Bearing Applications for the Aviation Industry: Manufacturing, Design, and Simulation. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(4):1447-1460. doi:10.1111/ffe.14552

BibTeX
@article{Fernandes2025,
  author = {Fernandes, P. H. E. and Baumert, M. and Dieckhoff, S. and Nagel, C. and Beber, V. C.},
  title = {Adhesively Bonded Composite Patch Repair in Load‐Bearing Applications for the Aviation Industry: Manufacturing, Design, and Simulation},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2025},
  volume = {48},
  number = {4},
  pages = {1447--1460},
  doi = {10.1111/ffe.14552}
}
Start for free →