Adhesively Bonded Composite Patch Repair in Load‐Bearing Applications for the Aviation Industry: Manufacturing, Design, and Simulation
Fatigue & Fracture of Engineering Materials & Structures · 2025-04 · 48 (4) · 1447-1460
DOI: 10.1111/ffe.14552 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 08.01.2025. Verfasst von P. H. E. Fernandes und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Four adhesively bonded composite patch repairs are considered: with one and two double CFRP layers and with scarf ratios of 1:15 and 1:30. Prepregs are applied to an artificially cracked aluminum plate and bonded using a film adhesive. Considering curing‐induced deflection of patches, samples with two double CFRP layers and a scarf ratio of 1:15 exhibit the highest deflection, while the patch with one double CFRP layer and a scarf ratio of 1:30 shows the lowest deflection. FE simulations align with experimental results showing deviations between −3% and +16%. Fatigue results of crack length as function of cycles reveal that patched samples have longer lifetimes (3.2–4.3 times) compared to nonpatched samples. Among patched samples, those with two double CFRP layers and a scarf ratio of 1:15 provide approximately 20% and 8% longer service life compared to counterparts with one double CFRP layer and a scarf ratio of 1:30, respectively.
Zitieren
APA
Fernandes, P. H. E., Baumert, M., Dieckhoff, S., Nagel, C., & Beber, V. C. (2025). Adhesively Bonded Composite Patch Repair in Load‐Bearing Applications for the Aviation Industry: Manufacturing, Design, and Simulation. Fatigue & Fracture of Engineering Materials & Structures, 48(4), 1447-1460. https://doi.org/10.1111/ffe.14552
Vancouver
Fernandes PHE, Baumert M, Dieckhoff S, Nagel C, Beber VC. Adhesively Bonded Composite Patch Repair in Load‐Bearing Applications for the Aviation Industry: Manufacturing, Design, and Simulation. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(4):1447-1460. doi:10.1111/ffe.14552
BibTeX
@article{Fernandes2025,
author = {Fernandes, P. H. E. and Baumert, M. and Dieckhoff, S. and Nagel, C. and Beber, V. C.},
title = {Adhesively Bonded Composite Patch Repair in Load‐Bearing Applications for the Aviation Industry: Manufacturing, Design, and Simulation},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2025},
volume = {48},
number = {4},
pages = {1447--1460},
doi = {10.1111/ffe.14552}
}
EUVIMED