EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Fatigue Crack Segmentation and Characterization of Additively Manufactured Ti‐6Al‐4V Using X‐Ray Computed Tomography

Bardia Hejazi, Amaya Compart, Tobias Fritsch, Ruben Wagner, Anja Weidner, Horst Biermann, Christopher Benz, Manuela Sander, Giovanni Bruno

Fatigue & Fracture of Engineering Materials & Structures · 2025-01 · 48 (1) · 204-216

DOI: 10.1111/ffe.14489 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2024-10-26. Written by Bardia Hejazi and 8 co-authors. Cited 9 times so far (Crossref); 44 references. The full text is freely available (open access, CC BY 4.0). Funded by: Deutsche Forschungsgemeinschaft.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

X‐ray computed tomography (XCT) is extremely useful for the non‐destructive analysis of additively manufactured (AM) components. AM components often show manufacturing defects such as lack‐of‐fusion (LoF), which are detrimental to the fatigue life of components. To better understand how cracks initiate and propagate from internal defects, we fabricated Ti‐6Al‐4V samples with an internal cavity using electron beam powder bed fusion. The samples were tested in high‐cycle and very high‐cycle fatigue regimes. XCT was used to locate crack initiation sites and to determine characteristic properties of cracks and defects with the aid of deep learning segmentation. LoF defects exposed to the outer surface of the samples after machining were found to be as detrimental to fatigue life as the internal artificial defects. This work can benefit industries that utilize the AM of high‐strength, lightweight alloys, in the design and manufacturing of components to improve part reliability and fatigue life.

Funding

  • Deutsche Forschungsgemeinschaft

Cite

APA

Hejazi, B., Compart, A., Fritsch, T., Wagner, R., Weidner, A., Biermann, H., Benz, C., Sander, M., & Bruno, G. (2025). Fatigue Crack Segmentation and Characterization of Additively Manufactured Ti‐6Al‐4V Using X‐Ray Computed Tomography. Fatigue & Fracture of Engineering Materials & Structures, 48(1), 204-216. https://doi.org/10.1111/ffe.14489

Vancouver

Hejazi B, Compart A, Fritsch T, Wagner R, Weidner A, Biermann H, et al. Fatigue Crack Segmentation and Characterization of Additively Manufactured Ti‐6Al‐4V Using X‐Ray Computed Tomography. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(1):204-216. doi:10.1111/ffe.14489

BibTeX
@article{Hejazi2025,
  author = {Hejazi, Bardia and Compart, Amaya and Fritsch, Tobias and Wagner, Ruben and Weidner, Anja and Biermann, Horst and Benz, Christopher and Sander, Manuela and Bruno, Giovanni},
  title = {Fatigue Crack Segmentation and Characterization of Additively Manufactured Ti‐6Al‐4V Using X‐Ray Computed Tomography},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2025},
  volume = {48},
  number = {1},
  pages = {204--216},
  doi = {10.1111/ffe.14489}
}
Start for free →