Fatigue Limit Estimation for Post‐Peened Induction‐Hardened and Tempered Steel Considering Changes in Surface Properties
Fatigue & Fracture of Engineering Materials & Structures · 2024-12 · 47 (12) · 4607-4617
DOI: 10.1111/ffe.14454 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 28.09.2024. Verfasst von Shogo Takesue und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Shot peening (SP) and fine particle peening (FPP) were performed as post‐treatments on induction‐hardened and tempered AISI 4140 steels. Furthermore, the combined effects of surface characteristics including changes in surface morphology, compressive residual stress, and hardness on the fatigue limit were quantitatively examined. The surface characteristics of the prepared specimens were investigated using a laser and stereomicroscope, a micro‐Vickers hardness tester, and an X‐ray device for residual stress measurements. The rotating bending fatigue properties were also examined. FPP increased the fatigue limit of induction‐hardened and tempered steel samples by introducing compressive residual stress and increasing their surface hardness. Conversely, the fatigue limit of the steel treated with SP was lower than that of the electrochemically polished sample owing to the formation of large dents. The fatigue limits of post‐peened induction‐hardened and tempered steels can be estimated using a modified Goodman diagram considering changes in surface properties.
Zitieren
APA
Takesue, S., Ono, K., Nambu, K., & Kikuchi, S. (2024). Fatigue Limit Estimation for Post‐Peened Induction‐Hardened and Tempered Steel Considering Changes in Surface Properties. Fatigue & Fracture of Engineering Materials & Structures, 47(12), 4607-4617. https://doi.org/10.1111/ffe.14454
Vancouver
Takesue S, Ono K, Nambu K, Kikuchi S. Fatigue Limit Estimation for Post‐Peened Induction‐Hardened and Tempered Steel Considering Changes in Surface Properties. Fatigue & Fracture of Engineering Materials & Structures. 2024;47(12):4607-4617. doi:10.1111/ffe.14454
BibTeX
@article{Takesue2024,
author = {Takesue, Shogo and Ono, Keisuke and Nambu, Koichiro and Kikuchi, Shoichi},
title = {Fatigue Limit Estimation for Post‐Peened Induction‐Hardened and Tempered Steel Considering Changes in Surface Properties},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2024},
volume = {47},
number = {12},
pages = {4607--4617},
doi = {10.1111/ffe.14454}
}
EUVIMED