Estimating the fatigue limits for quenched and tempered steel rods treated with multifunction cavitation considering residual stress, hardness, and surface pits
Fatigue & Fracture of Engineering Materials & Structures · 2024-11 · 47 (11) · 4000-4011
DOI: 10.1111/ffe.14415 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 12.08.2024. Verfasst von Shoichi Kikuchi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Steel Foundation for Environmental Protection Technology.
Abstract (Originalsprache)
In this study, multifunction cavitation (MFC) was performed on low‐alloy steel (AISI 4140 steel) rods with different hardnesses to increase their fatigue limit. It was found that a high compressive residual stress was generated on the surface of steel rods by MFC and that the magnitude of the compressive residual stress tended to increase with increasing specimen hardness, which resulted in a higher fatigue limit. However, fatigue cracks are known to be initiated from the pits and red rust that form on the surface during MFC treatment in water. Furthermore, relaxation of the compressive residual stress was also investigated during the fatigue test to elucidate the mechanism for improving the fatigue properties. The results showed that the fatigue limit for MFC‐treated steel rods was accurately estimated by considering residual stress relaxation, hardness, and pit formation. Validation of the fatigue limit estimation was also conducted through comparison with Murakami's equation.
Förderung
- Steel Foundation for Environmental Protection Technology
Zitieren
APA
Kikuchi, S., Ono, K., Yoshimura, T., & Ijiri, M. (2024). Estimating the fatigue limits for quenched and tempered steel rods treated with multifunction cavitation considering residual stress, hardness, and surface pits. Fatigue & Fracture of Engineering Materials & Structures, 47(11), 4000-4011. https://doi.org/10.1111/ffe.14415
Vancouver
Kikuchi S, Ono K, Yoshimura T, Ijiri M. Estimating the fatigue limits for quenched and tempered steel rods treated with multifunction cavitation considering residual stress, hardness, and surface pits. Fatigue & Fracture of Engineering Materials & Structures. 2024;47(11):4000-4011. doi:10.1111/ffe.14415
BibTeX
@article{Kikuchi2024,
author = {Kikuchi, Shoichi and Ono, Keisuke and Yoshimura, Toshihiko and Ijiri, Masataka},
title = {Estimating the fatigue limits for quenched and tempered steel rods treated with multifunction cavitation considering residual stress, hardness, and surface pits},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2024},
volume = {47},
number = {11},
pages = {4000--4011},
doi = {10.1111/ffe.14415}
}
EUVIMED