EUVIMEDEUVIMED entdecken
Crossref

An improved maximum tangential stress criterion for an inclined crack in uniaxial compression considering T ‐stress and crack parameter

Hongyan Liu, Fengjin Zhu, Yuezhi Zhou, Kangqi Liu

Fatigue & Fracture of Engineering Materials & Structures · 2024-06 · 47 (6) · 1914-1926

DOI: 10.1111/ffe.14284 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 11.03.2024. Verfasst von Hongyan Liu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rockmass in the practical engineering is often prone to compression; therefore, how to establish a fracture criterion to reflect the rockmass compression failure is vital. Take the rockmass with one inclined crack for instance, the mechanical behavior of the inclined crack face closure and friction sliding in uniaxial compression is firstly analyzed, and then the Kolosov–Muskhelishvili stress function of the cracked rockmass in uniaxial compression is established based on the complex stress functions. Next, the calculation methods of the stress intensity factor (SIF) K and three T ‐stress components at or near the crack tip considering three kinds of crack parameters (e.g., geometry parameter, friction strength parameter and deformation parameter) are obtained. Thirdly, the improved maximum tangential stress (MTS) criterion is obtained considering T ‐stress and three kinds of crack parameters. Finally, the test results of the wing‐crack initiation angle in uniaxial compression obtained by other researchers are adopted to verify the improved MTS criterion. Meanwhile, the effect of γ , the crack normal stiffness k n and shear stiffness k s , and the crack friction coefficient f on the wing‐crack initiation angle are discussed with the parametric sensitivity analysis.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Liu, H., Zhu, F., Zhou, Y., & Liu, K. (2024). An improved maximum tangential stress criterion for an inclined crack in uniaxial compression considering T ‐stress and crack parameter. Fatigue & Fracture of Engineering Materials & Structures, 47(6), 1914-1926. https://doi.org/10.1111/ffe.14284

Vancouver

Liu H, Zhu F, Zhou Y, Liu K. An improved maximum tangential stress criterion for an inclined crack in uniaxial compression considering T ‐stress and crack parameter. Fatigue & Fracture of Engineering Materials & Structures. 2024;47(6):1914-1926. doi:10.1111/ffe.14284

BibTeX
@article{Liu2024,
  author = {Liu, Hongyan and Zhu, Fengjin and Zhou, Yuezhi and Liu, Kangqi},
  title = {An improved maximum tangential stress criterion for an inclined crack in uniaxial compression considering T ‐stress and crack parameter},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2024},
  volume = {47},
  number = {6},
  pages = {1914--1926},
  doi = {10.1111/ffe.14284}
}
Kostenlos starten →