Experimental and finite element analysis for evaluating influence of contact pressure on fretting fatigue mechanisms of A319‐T6 cast aluminum alloy
Fatigue & Fracture of Engineering Materials & Structures · 2024-02 · 47 (2) · 453-472
DOI: 10.1111/ffe.14203 ↗At a glance
Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2023-12-06. Written by Yiping Liao and 8 co-authors. Cited 5 times so far (Crossref); 53 references. Funded by: General Motors Corporation.
Abstract (original language)
This paper evaluates the influence of contact pressure on the surface contact state, fretting damage degradation mechanism, crack initiation and propagation characteristics, and fretting fatigue life of A319‐T6 cast aluminum alloy in fretting fatigue test using bridge‐type fretting pad. For a certain range of contact pressure, the fretting fatigue life exhibits a trend of increasing and subsequently decreasing with increasing contact pressure. With finite element analysis, the fretting contact region can be divided into two characteristic zones according to the dynamic evolution of the contact status within one fatigue cycle. The contact pressure affects both the distribution of the two characteristic zones as well as the relative slip range, which results in distinct fretting damage mechanisms. The nucleation characteristics and propagation paths of fatigue cracks under three typical contact pressures were analyzed considering the effects of fretting damage and heterogeneous microstructures of the alloy, accounting for the contact pressure dependency of the fretting fatigue life.
Funding
- General Motors Corporation
Cite
APA
Liao, Y., Liu, X., He, G., Zhou, Z., Liu, Y., Li, J., Li, Z., Wang, Q., & He, Q. (2024). Experimental and finite element analysis for evaluating influence of contact pressure on fretting fatigue mechanisms of A319‐T6 cast aluminum alloy. Fatigue & Fracture of Engineering Materials & Structures, 47(2), 453-472. https://doi.org/10.1111/ffe.14203
Vancouver
Liao Y, Liu X, He G, Zhou Z, Liu Y, Li J, et al. Experimental and finite element analysis for evaluating influence of contact pressure on fretting fatigue mechanisms of A319‐T6 cast aluminum alloy. Fatigue & Fracture of Engineering Materials & Structures. 2024;47(2):453-472. doi:10.1111/ffe.14203
BibTeX
@article{Liao2024,
author = {Liao, Yiping and Liu, Xiaoshan and He, Guoqiu and Zhou, Zhiqiang and Liu, Yinfu and Li, Jingquan and Li, Zhe and Wang, Qigui and He, Qiao},
title = {Experimental and finite element analysis for evaluating influence of contact pressure on fretting fatigue mechanisms of A319‐T6 cast aluminum alloy},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2024},
volume = {47},
number = {2},
pages = {453--472},
doi = {10.1111/ffe.14203}
}
EUVIMED