EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Approach for the probabilistic fatigue assessment of welded joints based on the local geometry of the weld seam

Jan Schubnell, Sai Kumar Konidena, Matthias Jung, Moritz Braun, Sören Ehlers, Mauro Madia, Thomas Kannengießer, Daniel Löschner

Fatigue & Fracture of Engineering Materials & Structures · 2024-01 · 47 (1) · 88-107

DOI: 10.1111/ffe.14170 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 13.10.2023. Verfasst von Jan Schubnell und 7 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Welded joints show large variation of the weld toe geometry along the weld seam, which is one important reason for the comparably large scatter in fatigue life. Therefore, it is crucial to take the local geometry at the weld toe into account, to reduce the conservatism in fatigue assessment of welded joints. This study is based on the IBESS procedure for the calculation of the fatigue strength, whereby the evaluation of local geometrical parameters is carried out by means of 3D surface scans. The approach is validated against 26 fatigue test series. The fatigue life is in general overpredicted, whereas good agreement is achieved for high stress ratio ( ). A sensitivity analysis conducted with IBESS shows that weld toe radii ρ < 2 mm and flank angle α < 30° have a significant influence on the calculated fatigue strength. In contrast to this, no strong correlation between and the fatigue strength was determined experimentally in this study.

Zitieren

APA

Schubnell, J., Konidena, S. K., Jung, M., Braun, M., Ehlers, S., Madia, M., Kannengießer, T., & Löschner, D. (2024). Approach for the probabilistic fatigue assessment of welded joints based on the local geometry of the weld seam. Fatigue & Fracture of Engineering Materials & Structures, 47(1), 88-107. https://doi.org/10.1111/ffe.14170

Vancouver

Schubnell J, Konidena SK, Jung M, Braun M, Ehlers S, Madia M, et al. Approach for the probabilistic fatigue assessment of welded joints based on the local geometry of the weld seam. Fatigue & Fracture of Engineering Materials & Structures. 2024;47(1):88-107. doi:10.1111/ffe.14170

BibTeX
@article{Schubnell2024,
  author = {Schubnell, Jan and Konidena, Sai Kumar and Jung, Matthias and Braun, Moritz and Ehlers, Sören and Madia, Mauro and Kannengießer, Thomas and Löschner, Daniel},
  title = {Approach for the probabilistic fatigue assessment of welded joints based on the local geometry of the weld seam},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2024},
  volume = {47},
  number = {1},
  pages = {88--107},
  doi = {10.1111/ffe.14170}
}
Kostenlos starten →