EUVIMEDPoznaj EUVIMED
Crossref

High‐cycle and very‐high‐cycle fatigue behavior at two stress ratios of Ti‐6Al‐4V manufactured via laser powder bed fusion with different surface states

Rui Fu, Liang Zheng, Zheng Zhong, Youshi Hong

Fatigue & Fracture of Engineering Materials & Structures · 2023-06 · 46 (6) · 2348-2363

DOI: 10.1111/ffe.13985 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2023-03-06. Written by Rui Fu and 3 co-authors. Cited 26 times so far (Crossref); 67 references. Funded by: National Natural Science Foundation of China, Shenzhen Fundamental Research Program.

AbstraktDane bibliograficzneCiteRelated studies

Abstract (original language)

The high‐cycle fatigue (HCF) and very‐high‐cycle fatigue (VHCF) behavior of Ti‐6Al‐4V manufactured by laser powder bed fusion (L‐PBF) was investigated to reveal the effects of surface roughness and stress ratio on fatigue performance. Fatigue tests were performed by an ultrasonic vibration machine with a frequency of 20 kHz. The fatigue strength of surface‐polished specimens is generally higher than that of as‐built specimens in HCF and VHCF regimes. Fatigue cracks initiated from the subsurface of as‐built and surface‐polished L‐PBF Ti‐6Al‐4V. The values of size and depth for the defects that acted as fatigue crack origins present large scattering for L‐PBF Ti‐6Al‐4V due to the interaction between surface roughness and subsurface defects. For surface‐polished L‐PBF Ti‐6Al‐4V, fatigue cracks have almost the same resistance to propagation at both stress ratios of R = −1 and 0.7.

Funding

  • National Natural Science Foundation of China
  • Shenzhen Fundamental Research Program

Cite

APA

Fu, R., Zheng, L., Zhong, Z., & Hong, Y. (2023). High‐cycle and very‐high‐cycle fatigue behavior at two stress ratios of Ti‐6Al‐4V manufactured via laser powder bed fusion with different surface states. Fatigue & Fracture of Engineering Materials & Structures, 46(6), 2348-2363. https://doi.org/10.1111/ffe.13985

Vancouver

Fu R, Zheng L, Zhong Z, Hong Y. High‐cycle and very‐high‐cycle fatigue behavior at two stress ratios of Ti‐6Al‐4V manufactured via laser powder bed fusion with different surface states. Fatigue & Fracture of Engineering Materials & Structures. 2023;46(6):2348-2363. doi:10.1111/ffe.13985

BibTeX
@article{Fu2023,
  author = {Fu, Rui and Zheng, Liang and Zhong, Zheng and Hong, Youshi},
  title = {High‐cycle and very‐high‐cycle fatigue behavior at two stress ratios of Ti‐6Al‐4V manufactured via laser powder bed fusion with different surface states},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2023},
  volume = {46},
  number = {6},
  pages = {2348--2363},
  doi = {10.1111/ffe.13985}
}
Start for free →