EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

The influence of post‐curing protocols on the optical properties of provisional and long‐term 3D‐printable resin composites

Ido Luiz de Azevedo Feiten iD, Bruno Borges de Oliveira iD, Karin de Mello Weig iD, Luise Gomes da Motta iD, Luis Felipe J Schneider iD, Larissa Maria Assad Cavalcante iD

European Journal of Oral Sciences · 2026

DOI: 10.1111/eos.70106 ↗

At a glance

Journal article in European Journal of Oral Sciences, 2026. Written by Ido Luiz de Azevedo Feiten and 5 co-authors. Institution: Laboratory for Applied Biotechnology (LABA), School of Dentistry, Federal Fluminense University, Niteroi, Brazil. Major MEDLINE topics: Composite Resins, Printing, Three-Dimensional, Dental Materials, Light-Curing of Dental Adhesives. Cited 2 times so far (Crossref); 42 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Council for Scientific and Technological Development, Conselho Nacional de Desenvolvimento Científico e Tecnológico.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study determined the influence of post‐curing protocols on the color stability of provisional and long‐term 3D‐printable resin composites. Disc‐shaped specimens were fabricated from a provisional (Prov) and long‐term (Crown) 3D‐printable resin composites using a digital light processing printer. Post‐curing protocols included exposure to 405 nm‐based light sources (Anycubic for 30 or 60 min in the standard mode or Procure 1) and one 385 nm‐based light source (Procure 2 with distinct protocols). Color parameters ( L *, a *, b *) were measured at baseline, after 14 and 21 d of dry storage, and after 7 d of water immersion. Post‐curing protocol, material, and storage condition significantly influenced color stability. High‐irradiance protocols resulted in the highest color change values, exceeding the clinical acceptability threshold (Δ E 00 > 1.8). Water immersion induced a significant whitening effect and increased total color change in all groups. The long‐term resin demonstrated superior color stability compared to the provisional one across all post‐curing protocols. The choice of post‐curing protocol is critical for aesthetic performance, as high‐irradiance parameters, while potentially beneficial for mechanical properties, can compromise chromatic stability, particularly in materials with low filler content.

Subjects

MeSH terms (MEDLINE)

Composite ResinsPrinting, Three-DimensionalDental MaterialsLight-Curing of Dental AdhesivesColorMaterials TestingWaterImmersionTime FactorsHumansPolymerization

Author keywords

cosmetic dentistrydental materialsphotoinitiatorsprosthesis coloring

Substances

Composite ResinsDental MaterialsWater

Authors and institutions

  • Laboratory for Applied Biotechnology (LABA), School of Dentistry, Federal Fluminense University, Niteroi, Brazil.
  • Astro Science, Uberaba, Brazil.

ORCID profiles: Ido Luiz de Azevedo Feiten, Bruno Borges de Oliveira, Karin de Mello Weig, Luise Gomes da Motta, Luis Felipe J Schneider, Larissa Maria Assad Cavalcante

Funding

  • National Council for Scientific and Technological Development
  • Conselho Nacional de Desenvolvimento Científico e Tecnológico

Cite

APA

Feiten, I. L. A., de Oliveira, B. B., de Mello Weig, K., da Motta, L. G., Schneider, L. F. J., & Cavalcante, L. M. A. (2026). The influence of post‐curing protocols on the optical properties of provisional and long‐term 3D‐printable resin composites. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70106

Vancouver

Feiten ILA, de Oliveira BB, de Mello Weig K, da Motta LG, Schneider LFJ, Cavalcante LMA. The influence of post‐curing protocols on the optical properties of provisional and long‐term 3D‐printable resin composites. European Journal of Oral Sciences. 2026. doi:10.1111/eos.70106

BibTeX
@article{Feiten2026,
  author = {Feiten, Ido Luiz de Azevedo and de Oliveira, Bruno Borges and de Mello Weig, Karin and da Motta, Luise Gomes and Schneider, Luis Felipe J and Cavalcante, Larissa Maria Assad},
  title = {The influence of post‐curing protocols on the optical properties of provisional and long‐term 3D‐printable resin composites},
  journal = {European Journal of Oral Sciences},
  year = {2026},
  doi = {10.1111/eos.70106}
}
Start for free →