EUVIMEDObjevte EUVIMED
Crossref

Effect from the sequence of heat treatment and grinding on the mechanical properties of nickel–titanium rotary instruments

Nayoung Bu iD, Jung-Hong Ha iD, Hyeon-Cheol Kim iD, Sang Won Kwak iD

European Journal of Oral Sciences · 2026-06 · 134 (3)

DOI: 10.1111/eos.70074 ↗

At a glance

Journal article in European Journal of Oral Sciences, published online on 2026-02-25. Written by Nayoung Bu and 3 co-authors. Institution: Department of Conservative Dentistry, School of Dentistry, Dental Research Institute, Dental and Life Science Institute, Pusan National University, Y…. Major MEDLINE topics: Nickel, Titanium, Dental Alloys, Root Canal Preparation. Cited 1 times so far (Crossref); 29 references. Funded by: Pusan National University.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

This study aimed to evaluate how the sequence of heat treatment and grinding affects the mechanical properties of nickel–titanium rotary instruments. ProTaper Gold (PTG) and three experimental FQ files with identical designs, but different manufacturing sequences, were tested. FQhg was heat‐treated before grinding, FQgh was ground before heat treatment, and FQnh was not heat‐treated. Cyclic fatigue resistance, torsional resistance, and bending stiffness were measured ( n = 15). Scanning electron microscopy and differential scanning calorimetry (DSC) were performed. Statistical analysis was conducted using one‐way anova and Tukey's test at a 95% significance level. FQhg showed the highest cyclic fatigue resistance, followed by FQgh, FQnh, and PTG ( p < 0.05), while no significant differences were found in torsional strength, toughness, or distortion angle among the FQ groups. PTG showed higher torsional strength and bending stiffness, likely due to its different cross‐sectional design and taper. DSC analysis revealed minor differences in austenite transformation temperatures between FQhg and FQgh. The sequence of heat treatment and grinding significantly influenced cyclic fatigue resistance, with post‐heat‐treatment grinding (FQhg) providing superior performance; however, its impact on other mechanical properties was limited. The clinical relevance of processing sequence appears minimal compared to factors such as cross‐sectional design and heat treatment.

Subjects

MeSH terms (MEDLINE)

NickelTitaniumDental AlloysRoot Canal PreparationDental InstrumentsHot TemperatureTorsion, MechanicalCalorimetry, Differential ScanningMaterials TestingMicroscopy, Electron, ScanningPliabilitySurface PropertiesEquipment DesignStress, MechanicalFlexural StrengthDental Stress Analysis

Author keywords

bending stiffness, cyclic fatigue resistance, grindingmanufacturing process, heat treatment, torsional resistance

Substances

NickelTitaniumtitanium nickelideDental AlloysAustenite

Authors and institutions

  • Department of Conservative Dentistry, School of Dentistry, Dental Research Institute, Dental and Life Science Institute, Pusan National University, Yangsan, South Korea.
  • Department of Conservative Dentistry, College of Dentistry, Kyungpook National University, Daegu, South Korea.

ORCID profiles: Nayoung Bu, Jung-Hong Ha, Hyeon-Cheol Kim, Sang Won Kwak

Funding

  • Pusan National University

Cite

APA

Bu, N., Ha, J. H., Kim, H. C., & Kwak, S. W. (2026). Effect from the sequence of heat treatment and grinding on the mechanical properties of nickel–titanium rotary instruments. European Journal of Oral Sciences, 134(3). https://doi.org/10.1111/eos.70074

Vancouver

Bu N, Ha JH, Kim HC, Kwak SW. Effect from the sequence of heat treatment and grinding on the mechanical properties of nickel–titanium rotary instruments. European Journal of Oral Sciences. 2026;134(3). doi:10.1111/eos.70074

BibTeX
@article{Bu2026,
  author = {Bu, Nayoung and Ha, Jung-Hong and Kim, Hyeon-Cheol and Kwak, Sang Won},
  title = {Effect from the sequence of heat treatment and grinding on the mechanical properties of nickel–titanium rotary instruments},
  journal = {European Journal of Oral Sciences},
  year = {2026},
  volume = {134},
  number = {3},
  doi = {10.1111/eos.70074}
}
Start for free →