Three‐dimensional printing: A new source of exposure to (meth)acrylates in a dental technician
Contact Dermatitis · 2024
DOI: 10.1111/cod.14512 ↗At a glance
Fallbericht in Contact Dermatitis, 2024. Written by Goël Fenech and 3 co-authors. Institution: Department of Occupational and Environmental Diseases, University Hospital of Centre of Paris, Hotel-Dieu Hospital, AP-HP, Paris, France. Major MEDLINE topics: Dermatitis, Allergic Contact, Dermatitis, Occupational. 10 references. The full text is freely available (open access, CC BY-NC-ND 4.0).
Abstract (original language)
Acrylates and methacrylates {referred as (meth)acrylates} are plastic materials formed by the polymerization of monomers derived from esters of acrylic or methacrylic acid. These molecules have a wide range of applications in paints, artificial nails, glues and medical devices. Dental personnel1 and printing workers2 are at risk of occupational allergic contact dermatitis (OACD). The rapid development and expansion of the three-dimensional (3D)-printing in digital prosthetic dentistry is becoming a new and additional source of (meth)acrylates exposure in dental technicians (DTs). A 60 years old man DT was referred to our allergy clinic for suspected OACD. His past medical history included sarcoidosis in spontaneous remission and diabetes. He had worked as a DT for 40 years. In 1980, he developed occupational hand eczema after (meth)acrylates exposure. Hand dermatitis healed when patient changed his work duties and did not have contact anymore with (meth)acrylates. He was not patch tested at this time. Recently, the patient started using 3D-printing technology while wearing medical gloves and developed erythematous and scaly plaques on cheeks, eyelids, hands and forearms (Figure 1). He had noticed complete healing after 14 sick leave days. In its safety data sheet (SDS), the resin used for the 3D-printing was declared to contain acrylic acid (CAS: 79-10-7), polymeric urethane acrylates (CAS: 68585-11-5), 4-tert-butylcyclohexyl acrylate (CAS: 84100-23-2), tricyclodecane dimethanol diacrylate (CAS: 42594-17-2). Patch tests were performed with the European baseline as well as cosmetics, plastics/glues, isocyanates, acrylates, epoxy resins series (Chemotechnique Diagnostics, Vellinge, Sweden) using IQ-Ultra chambers (Chemotechnique Diagnostics) on Hypafix tape (BSN medical, Stockholm, Sweden) and patient's gloves. Reading performed on day(D) 2 and D3 showed positive reactions to 2-hydroxyethyl methacrylate(+), 2-hydroxyethyl acrylate(++), hydroxypropyl methacrylate (+), 2-hydroxypropyl acrylate(++), 1-6-Hexanediol diacrylate(+), tetraethylene glycol dimethacrylate(+), tetraethylene glycol diacrylate(++), Diethylene glycol diacrylate(++) (Figure 2) according to ESCD criteria.3 All other patch test sites appeared unremarkable even 10 days after the patch testing. The 3D-printing is gaining tremendous recognition in various specialties of dentistry and has been used to create a wide range of dental devices. The process can be described as follows: The DT creates a digital data set on the computer and then designs a 3D object whose data are transferred to the 3D-printer, where it is converted into a physical object.4 Plastics are the materials most often used in 3D-printing. In dentistry, printable resins consist of liquid acrylates monomers and photo-initiators.5 Sensitization to (meth)acrylates was an expected finding because of the remote history of hand eczema caused by (meth)acrylates. Once patients are sensitized, single-use medical gloves are not efficient enough to obtain protection from (meth)acrylates in occupational settings.6 Our patient had positive reactions to different (meth)acrylates which are explained as the results of cross allergy.7 Furthermore, information about the contents of (meth)acrylates given in the SDS of the resin used in 3D-printing, might be incomplete or unreliable.8 Moreover, acrylic compounds used in commercial products are generally rather impure and may contain multiple (meth)acrylates also not declared in the SDS.7 To our knowledge, this is the first case report of OACD caused by (meth)acrylates in the emerging context of 3D-printing in DTs. Few cases have been described in the 3D-printing industry about workers who had OACD while handling liquid resin prints, and was found to be allergic to epoxy resins compounds used in 3D-printing but not to (meth)acrylates.9 Our patient is the first published case of 3D-printing as a new source of exposure to (meth)acrylates in DT. However, (meth)acrylates represent the most important occupational sensitizers in DTs10 and 3D-printing might be a new application for (meth)acrylates resulting in an epidemic of OACD in this population. Goël Fenech: Writing – original draft; writing – review and editing; investigation. Amir Fenech: Investigation. Lynda Bensefa-Colas: Writing – review and editing. Marie-Noëlle Crepy: Supervision; writing – review and editing. The authors declare that they do not have any conflicts of interest regarding this study. The patient in this manuscript has given written informed consent to publication of their case details and photographs.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- Department of Occupational and Environmental Diseases, University Hospital of Centre of Paris, Hotel-Dieu Hospital, AP-HP, Paris, France.
- Henri Mondor Hospital, Créteil, France.
- HERA Team, Université Paris Cité, CRESS-INSERM UMR-1153, Paris, France.
ORCID profiles: Goël Fenech, Marie-Noëlle Crepy
Cite
APA
Fenech, G., Fenech, A., Bensefa-Colas, L., & Crepy, M. N. (2024). Three‐dimensional printing: A new source of exposure to (meth)acrylates in a dental technician. Contact Dermatitis. https://doi.org/10.1111/cod.14512
Vancouver
Fenech G, Fenech A, Bensefa-Colas L, Crepy MN. Three‐dimensional printing: A new source of exposure to (meth)acrylates in a dental technician. Contact Dermatitis. 2024. doi:10.1111/cod.14512
BibTeX
@article{Fenech2024,
author = {Fenech, Goël and Fenech, Amir and Bensefa-Colas, Lynda and Crepy, Marie-Noëlle},
title = {Three‐dimensional printing: A new source of exposure to (meth)acrylates in a dental technician},
journal = {Contact Dermatitis},
year = {2024},
doi = {10.1111/cod.14512}
}
EUVIMED