EUVIMEDEUVIMED entdecken
Crossref

Optimization Studies of Robocasted Bioceramic Bone Scaffolds Using Analytical Hierarchy Process and TOPSIS

Umanath Puthillam iD, Jishita Ravoor, Renold Elsen Selvam, Deepan Karuppan, Balaji Bakthavachalam, Govind Purohit

Artificial Organs · 2025

DOI: 10.1111/aor.70014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Artificial Organs, 2025. Verfasst von Umanath Puthillam und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India. Hauptthemen laut MEDLINE: Tissue Scaffolds, Ceramics, Bone Substitutes, Biocompatible Materials. Die Arbeit nennt 25 Literaturangaben. Gefördert von: Science and Engineering Research Board.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

A bone scaffold is used to treat critical size bone defects and demands contradictory physical and mechanical properties. It is difficult to achieve the desirable properties using a single material, and composite materials are used to develop the scaffolds.

Methods

A combination of bioceramics such as hydroxyapatite (HAP), calcium silicate (CS), or calcium phosphate (CP) with different percentages of multiwalled carbon nanotubes (MWCNT) is used to develop the scaffolds using Robocasting 3D printing to treat the cancellous bone defects. The bioceramics will enhance the biocompatibility and bone regeneration of the scaffold while the MWCNT will improve the mechanical properties. Compressive strength, density, shrinkage, and porosity are selected as deciding factors, and the analytic hierarchy process (AHP) and technique for order of preference by similarity to ideal solution (TOPSIS) are used to identify the best composite materials for the required properties.

Results

The scaffolds are printed and sintered and observed that CS with 1 mass % of MWCNT sintered at 1200°C, HAP with 0.5 mass % of MWCNT sintered at 1100°C, and CP with 0.5 mass % of MWCNT sintered at 1200°C are the best bone scaffold options.

Conclusion

The ideal processing parameters for developing bioceramic bone scaffolds using the robocasting technique are identified and reported.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsCeramicsBone SubstitutesBiocompatible MaterialsDurapatitePrinting, Three-DimensionalCalcium PhosphatesSilicatesNanotubes, CarbonPorosityCalcium CompoundsCompressive StrengthHumansMaterials TestingTissue EngineeringBone Regeneration

Stichwörter der Autor:innen

AHPTOPSISadditive manufacturingbioceramicsbone scaffoldsrobocasting

Substanzen

DurapatiteCalcium PhosphatesSilicatesNanotubes, Carboncalcium silicateBone SubstitutesCalcium CompoundsBiocompatible Materialscalcium phosphate

Autor:innen und Institutionen

  • School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India.

ORCID-Profile: Umanath Puthillam

Förderung

  • Science and Engineering Research Board

Zitieren

APA

Puthillam, U., Ravoor, J., Selvam, R. E., Karuppan, D., Bakthavachalam, B., & Purohit, G. (2025). Optimization Studies of Robocasted Bioceramic Bone Scaffolds Using Analytical Hierarchy Process and TOPSIS. Artificial Organs. https://doi.org/10.1111/aor.70014

Vancouver

Puthillam U, Ravoor J, Selvam RE, Karuppan D, Bakthavachalam B, Purohit G. Optimization Studies of Robocasted Bioceramic Bone Scaffolds Using Analytical Hierarchy Process and TOPSIS. Artificial Organs. 2025. doi:10.1111/aor.70014

BibTeX
@article{Puthillam2025,
  author = {Puthillam, Umanath and Ravoor, Jishita and Selvam, Renold Elsen and Karuppan, Deepan and Bakthavachalam, Balaji and Purohit, Govind},
  title = {Optimization Studies of Robocasted Bioceramic Bone Scaffolds Using Analytical Hierarchy Process and TOPSIS},
  journal = {Artificial Organs},
  year = {2025},
  doi = {10.1111/aor.70014}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche