EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Sustainable Continuous Drying of High Moisture Content Seaweed via Twin Screw Extrusion—A Proof of Concept Study and Statistical Analysis

Ahmad Habeeb Allah, Mitchell Rae, Mehakpreet Singh iD, Samuel Solomon, Gavin M Walker

Journal of Food Science · 2026

DOI: 10.1111/1750-3841.70930 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Food Science, 2026. Verfasst von Ahmad Habeeb Allah und 4 weiteren Autor:innen. Beteiligte Einrichtung: Bernal Institute, Department of Chemical Sciences, University of Limerick, Limerick, Ireland. Hauptthemen laut MEDLINE: Seaweed, Desiccation, Water, Fucus. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Department of Agriculture, Environment and Rural Affairs Northern Ireland, Department of Agriculture, Food and Marine Ireland, Finnebrogue.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Seaweed gained a great deal of interest in recent years as a valuable source in food, cosmetics, and pharmaceuticals. Efficient economic utilization of seaweed depends on the techniques employed to remove their high moisture content (MC). This study proposes a novel continuous drying technique for Fucus vesiculosus seaweed biomass using twin‐screw extrusion (TSE), comparing findings with hot air oven drying (OD). The effects of processing temperatures (35°C–85°C) and drying airflow rates (2.5–15 L/min) on final MC, total phenolic content (TPC), particle size distribution (PSD), and topography of TSE dried seaweed were investigated. For OD, batch drying was fixed at 35°C and 45°C in a (Binder drying and heating chamber ED115). Statistical analysis on obtained results was also performed using multiple linear regression (MLR) to see if input variables had a significant effect on the obtained results. Results showcased superior drying via TSE wherein the average drying time was approximately 12 min. At an airflow rate of 12.5 L/min and processing temperatures of 45°C, MC of seaweed was reduced from 70% to 13% whilst preserving TPC (8.17–7.26 g phloroglucinol equivalent (PGE)/100 g DW). In contrast, for similar processing times via OD, MC was reduced from 70% to 62.5%, with TPC decreasing to 6.25 g PGE/100 g DW. Statistical analysis revealed that both temperature and airflow rate significantly effected both MC and TPC for TSE dried samples. The data suggest that TSE is a promising unit operation for the continuous drying of F. vesiculosus in preparation for subsequent processing of seaweed products.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SeaweedDesiccationWaterFucusFood HandlingHot TemperatureParticle SizePhenolsFood, ProcessedPhloroglucinolLinear ModelsEdible Seaweeds

Stichwörter der Autor:innen

Fucus vesiculosusdryingphlorotannins.sea algaeseaweedtwin‐screw extrusion

Substanzen

WaterPhenolsPhloroglucinol

Autor:innen und Institutionen

  • Bernal Institute, Department of Chemical Sciences, University of Limerick, Limerick, Ireland.
  • MACSI, Department of Mathematics and Statistics, University of Limerick, Limerick, Ireland.

ORCID-Profile: Mehakpreet Singh

Förderung

  • Department of Agriculture, Environment and Rural Affairs Northern Ireland
  • Department of Agriculture, Food and Marine Ireland
  • Finnebrogue
  • Devenish Nutrition Ltd
  • JMW Farms Ltd
  • Sealac, and The Seaweed Company
  • Environment and Rural Affairs Northern Ireland

Zitieren

APA

Habeeb Allah, A., Rae, M., Singh, M., Solomon, S., & Walker, G. M. (2026). Sustainable Continuous Drying of High Moisture Content Seaweed via Twin Screw Extrusion—A Proof of Concept Study and Statistical Analysis. Journal of Food Science. https://doi.org/10.1111/1750-3841.70930

Vancouver

Habeeb Allah A, Rae M, Singh M, Solomon S, Walker GM. Sustainable Continuous Drying of High Moisture Content Seaweed via Twin Screw Extrusion—A Proof of Concept Study and Statistical Analysis. Journal of Food Science. 2026. doi:10.1111/1750-3841.70930

BibTeX
@article{HabeebAllah2026,
  author = {Habeeb Allah, Ahmad and Rae, Mitchell and Singh, Mehakpreet and Solomon, Samuel and Walker, Gavin M},
  title = {Sustainable Continuous Drying of High Moisture Content Seaweed via Twin Screw Extrusion—A Proof of Concept Study and Statistical Analysis},
  journal = {Journal of Food Science},
  year = {2026},
  doi = {10.1111/1750-3841.70930}
}
Kostenlos starten →