EUVIMEDEUVIMED entdecken
Crossref

Influences of Drying Medium and Inlet Temperature on Properties and Surface Characteristics of Spray‐Dried Powders From Pumpkin‐Based Carotenoids Oil‐in‐Water Emulsion

Kulthida Raksawong, Luxsika Ngamwonglumlert iD, Naphaporn Chiewchan iD, Sakamon Devahastin iD

Journal of Food Science · 2026

DOI: 10.1111/1750-3841.70927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Food Science, 2026. Verfasst von Kulthida Raksawong und 3 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Food Processing Research Laboratory, Department of Food Engineering, Faculty of Engineering, King Mongkut's University of Technology Thonbur…. Hauptthemen laut MEDLINE: Carotenoids, Desiccation, Cucurbita, Food Handling. Die Arbeit nennt 49 Literaturangaben. Gefördert von: National Research Council of Thailand.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Oil‐in‐water emulsion containing carotenoids can be processed into natural yellow colorant powder via spray drying. However, spray drying, which typically employs hot air as drying medium, often causes pigment degradation. Here, superheated steam was for the first time tested as alternative medium to spray dry pumpkin‐based carotenoids emulsion; results were compared with those obtained using hot air as conventional medium. Air‐dried powder exhibited higher yields, lower moisture contents, and water activities compared to steam‐dried powder. Air‐dried particles were larger and had smoother surfaces. In contrast, steam‐dried particles were smaller and exhibited wrinkled surfaces, which contributed to higher bulk density and faster reconstitution. Confocal laser scanning microscopy revealed that surfaces of air‐dried particles were densely covered with carotenoids, while that of steam‐dried particles had lower amount of such compound as a result of steam pushing back hydrophobic carotenoids into particle matrix, resulting in higher carotenoids retention and more intense yellow color of latter powder. Increasing medium temperature resulted in higher yields for both powders, whereas moisture content, water activity, bulk density, and reconstitution time decreased. Carotenoids retention decreased with increasing temperature, particularly in air‐dried powder, which was associated with more extensive color fading.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CarotenoidsDesiccationCucurbitaFood HandlingEmulsionsPowdersWaterSurface PropertiesTemperatureSteamParticle SizeFood, ProcessedColorSpray DryingHot Temperature

Stichwörter der Autor:innen

morphologyreconstitutionspray dryingsuperheated steam dryingsurface composition

Substanzen

CarotenoidsEmulsionsPowdersWaterSteam

Autor:innen und Institutionen

  • Advanced Food Processing Research Laboratory, Department of Food Engineering, Faculty of Engineering, King Mongkut's University of Technology Thonburi, Bangkok, Thailand.
  • The Academy of Science, The Royal Society of Thailand, Bangkok, Thailand.

ORCID-Profile: Luxsika Ngamwonglumlert, Naphaporn Chiewchan, Sakamon Devahastin

Förderung

  • National Research Council of Thailand

Zitieren

APA

Raksawong, K., Ngamwonglumlert, L., Chiewchan, N., & Devahastin, S. (2026). Influences of Drying Medium and Inlet Temperature on Properties and Surface Characteristics of Spray‐Dried Powders From Pumpkin‐Based Carotenoids Oil‐in‐Water Emulsion. Journal of Food Science. https://doi.org/10.1111/1750-3841.70927

Vancouver

Raksawong K, Ngamwonglumlert L, Chiewchan N, Devahastin S. Influences of Drying Medium and Inlet Temperature on Properties and Surface Characteristics of Spray‐Dried Powders From Pumpkin‐Based Carotenoids Oil‐in‐Water Emulsion. Journal of Food Science. 2026. doi:10.1111/1750-3841.70927

BibTeX
@article{Raksawong2026,
  author = {Raksawong, Kulthida and Ngamwonglumlert, Luxsika and Chiewchan, Naphaporn and Devahastin, Sakamon},
  title = {Influences of Drying Medium and Inlet Temperature on Properties and Surface Characteristics of Spray‐Dried Powders From Pumpkin‐Based Carotenoids Oil‐in‐Water Emulsion},
  journal = {Journal of Food Science},
  year = {2026},
  doi = {10.1111/1750-3841.70927}
}
Kostenlos starten →