Study on Drying Characteristics and Numerical Model of Turnips Based on Infrared Radiation Drying Technology
Journal of Food Science · 2026-03 · 91 (3)
DOI: 10.1111/1750-3841.70811 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Food Science, online erschienen am 14.03.2026. Verfasst von Linbin Hu und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Tarim University, Alear, China. Hauptthemen laut MEDLINE: Infrared Rays, Desiccation, Food Handling. Die Arbeit nennt 46 Literaturangaben. Gefördert von: Guiding Scientific and Technological Project of the Corps, Tarim University.
Abstract (Originalsprache)
To overcome the issues of low efficiency and poor quality associated with traditional hot‐air drying in turnip processing, this study employed infrared radiation drying technology to systematically investigate the effects of different temperatures (50°C, 55°C, 60°C, and 65°C) and slice thicknesses (4, 6, and 8 mm) on the drying characteristics and quality of Xinjiang turnips. Results indicate that the drying process primarily consists of a rate‐decreasing stage, with drying time shortening as temperature increases and thickness decreases. The effective moisture diffusion coefficient ( D eff ) ranged from 2.14 × 10 −10 to 1.14 × 10 −9 m 2 /s, increasing with both temperature and thickness. Activation energies for different thicknesses (4, 6, and 8 mm) were 40.90, 33.91, and 28.59 kJ/mol, respectively. Among various drying mathematical models, the Page model demonstrated the best fitting performance ( R 2 > 0.99). Regarding turnip quality, increased temperature led to higher color difference ∆ E and higher rehydration ratio, whereas increased thickness reduced both parameters. A two‐dimensional axisymmetric heat and mass transfer model constructed using COMSOL yielded simulated values for dry‐basis moisture content and temperature with experimental values, achieving determination coefficients R 2 of 0.976 and 0.952, respectively. This study provides theoretical support for optimizing turnip drying using infrared technology and advancing numerical simulation techniques.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- College of Mechanical and Electrical Engineering, Tarim University, Alear, China.
- Xinjiang Production and Construction Corps (XPCC) Key Laboratory of Utilization and Equipment of Special Agricultural and Forestry Products in Southern Xinjiang, Alear, China.
- Modern Agricultural Engineering Key Laboratory at Universities of Education Department of Xinjiang Uygur Autonomous Region, Alar, China.
- Tarim University College of Horticulture and Forestry, Alear, China.
ORCID-Profile: Linbin Hu, Tengjiao Wang
Förderung
- Guiding Scientific and Technological Project of the Corps
- Tarim University
Zitieren
APA
Hu, L., Wang, T., Yang, F., Yi, X., Yang, Z., Jiang, J., Deng, D., & Xuan, Z. (2026). Study on Drying Characteristics and Numerical Model of Turnips Based on Infrared Radiation Drying Technology. Journal of Food Science, 91(3). https://doi.org/10.1111/1750-3841.70811
Vancouver
Hu L, Wang T, Yang F, Yi X, Yang Z, Jiang J, et al. Study on Drying Characteristics and Numerical Model of Turnips Based on Infrared Radiation Drying Technology. Journal of Food Science. 2026;91(3). doi:10.1111/1750-3841.70811
BibTeX
@article{Hu2026,
author = {Hu, Linbin and Wang, Tengjiao and Yang, Fan and Yi, Xiaokang and Yang, ZhouYang and Jiang, Jie and Deng, DeSheng and Xuan, ZhengYing},
title = {Study on Drying Characteristics and Numerical Model of Turnips Based on Infrared Radiation Drying Technology},
journal = {Journal of Food Science},
year = {2026},
volume = {91},
number = {3},
doi = {10.1111/1750-3841.70811}
}
EUVIMED