EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Acoustic Stack for Combined Intravascular Ultrasound and Photoacoustic Imaging

Antonio Lopez-Marin, Verya Daeichin, Andres Hunt, Geert Springeling, Robert Beurskens, Antonius F W van der Steen, Gijs van Soest

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control · 2025

DOI: 10.1109/tuffc.2024.3465837 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2025. Verfasst von Antonio Lopez-Marin und 6 weiteren Autor:innen. Hauptthemen laut MEDLINE: Photoacoustic Techniques, Ultrasonography, Interventional, Multimodal Imaging. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Medical Delta Scientific Program, The Netherlands, under Project Novel Instruments for Minimally Invasive Techniques.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multimodal intravascular ultrasound and photoacoustic (IVUS/PA) imaging is a promising diagnostic tool for cardiovascular diseases like atherosclerosis. IVUS/PA catheters typically require two independent transducers due to different frequency requirements, potentially increasing the catheter size. To facilitate multimodal imaging within conventional catheter dimensions, we designed, fabricated, and characterized a dual-transducer acoustic stack where a low-frequency (LF) PA receiver sits as a matching layer for the high-frequency (HF) US transducer. While the HF transducer operates around 50 MHz, the LF receiver targets frequencies below 15 MHz to capture most of the PA energy from atherosclerotic plaque lipids. Simulation results reveal that this configuration could increase the sensitivity of the HF transducer by 3.54 dB while maintaining bandwidth. Phantom experiments with fabricated stacks showed improved performance for the US transducer, validating the enhanced sensitivity and bandwidth. Following improvements in stack fabrication, the proposed acoustic stack is a viable design that can significantly enhance diagnostic accuracy for atherosclerosis, providing high-resolution, multifrequency imaging within a compact catheter form factor.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Photoacoustic TechniquesUltrasonography, InterventionalMultimodal ImagingPhantoms, ImagingTransducersEquipment DesignHumans

Förderung

  • Medical Delta Scientific Program, The Netherlands, under Project Novel Instruments for Minimally Invasive Techniques

Zitieren

APA

Lopez-Marin, A., Daeichin, V., Hunt, A., Springeling, G., Beurskens, R., van der Steen, A. F. W., & van Soest, G. (2025). Acoustic Stack for Combined Intravascular Ultrasound and Photoacoustic Imaging. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. https://doi.org/10.1109/tuffc.2024.3465837

Vancouver

Lopez-Marin A, Daeichin V, Hunt A, Springeling G, Beurskens R, van der Steen AFW, et al. Acoustic Stack for Combined Intravascular Ultrasound and Photoacoustic Imaging. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 2025. doi:10.1109/tuffc.2024.3465837

BibTeX
@article{LopezMarin2025,
  author = {Lopez-Marin, Antonio and Daeichin, Verya and Hunt, Andres and Springeling, Geert and Beurskens, Robert and van der Steen, Antonius F W and van Soest, Gijs},
  title = {Acoustic Stack for Combined Intravascular Ultrasound and Photoacoustic Imaging},
  journal = {IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control},
  year = {2025},
  doi = {10.1109/tuffc.2024.3465837}
}
Kostenlos starten →