PV-Integrated Auxiliary Power Module Using Hybrid Multi-Input Multi-Output DC--DC Converter for Electric Vehicle Applications
IEEE Transactions on Transportation Electrification · 2026-08 · 12 (4) · 6496-6507
DOI: 10.1109/tte.2026.3687401 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2026-08. Verfasst von Majid Mehrasa und 2 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben.
Abstract (Originalsprache)
This article proposes a hybrid multi-input multi-output DC–DC converter for integrating photovoltaic (PV) unit and auxiliary power module (APM) to simultaneously supply low-voltage/power loads inside an electric vehicle (EV) as well as actively participate in EV battery management system (BMS). Defining three operation modes, including charging, discharging, and idle, the proposed converter guarantees multiple outputs isolated from EV-high-voltage battery (EV-HVB) with significant safe operation regardless of the power flow direction between the auxiliary battery and EV battery cell. Compared to the existing APMs, the proposed PV-integrated APM provides much wider voltage ranges for internal loads based on low-voltage auxiliary battery (LVAB) with a smaller voltage rate and size. Using the pole placement method (PPM) as well as comprehensive large-signal and small-signal dynamic models, two closed-loop control systems are presented to enable the desirable current flow and regulated output voltages. To this end, the controllability of the proposed system is extensively assessed, and the effective state feedback gains are designed associated with the closed-loop system eigenvalues with the adjusted and sufficient stability margin. Both simulation and experimental results are employed to verify the noticeable contribution of the proposed system, along with the designed control technique to APM and BMS in EV applications.
Zitieren
APA
Mehrasa, M., Kurdkandi, N. V., & Mi, C. C. (2026). PV-Integrated Auxiliary Power Module Using Hybrid Multi-Input Multi-Output DC--DC Converter for Electric Vehicle Applications. IEEE Transactions on Transportation Electrification, 12(4), 6496-6507. https://doi.org/10.1109/tte.2026.3687401
Vancouver
Mehrasa M, Kurdkandi NV, Mi CC. PV-Integrated Auxiliary Power Module Using Hybrid Multi-Input Multi-Output DC--DC Converter for Electric Vehicle Applications. IEEE Transactions on Transportation Electrification. 2026;12(4):6496-6507. doi:10.1109/tte.2026.3687401
BibTeX
@article{Mehrasa2026,
author = {Mehrasa, Majid and Kurdkandi, Naser Vosoughi and Mi, Chunting Chris},
title = {PV-Integrated Auxiliary Power Module Using Hybrid Multi-Input Multi-Output DC--DC Converter for Electric Vehicle Applications},
journal = {IEEE Transactions on Transportation Electrification},
year = {2026},
volume = {12},
number = {4},
pages = {6496--6507},
doi = {10.1109/tte.2026.3687401}
}
EUVIMED