EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of a Three-Input, Single-Output DC–DC Converter for Electric Charging Station

Sivaram Natarajan Vijayanathan, Lavanya Anbazhagan, Jagabar Sathik Mohamed Ali, Divya Navamani Jayachandran, Pradeep Vishnuram, CH. Naga Sai Kalyan, Mustafa Abdullah, Rajkumar Singh Rathore

Energies · 19.02.2025 · 18 (4) · 1005

DOI: 10.3390/en18041005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 19.02.2025. Verfasst von Sivaram Natarajan Vijayanathan und 7 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a novel four-port DC–DC converter designed to integrate photovoltaics, fuel cells, and supercapacitors with one DC charging single-output port with a reduced component count. The proposed converter ensures an efficient power management strategy to manage the load power demand and optimize the power flow from the sources. The power management controller helps enhance the performance of the system by dynamically prioritizing the sources based on their availability and the demand of the load. A comprehensive reliability analysis is conducted to measure the converter’s robustness under varying load conditions, proving its suitability for real-world applications. The proposed topology’s performance was validated in three different scenarios for 1 kW using a simulation tool, and experiments in the laboratory were conducted. The failure rate and efficiency of the system are analyzed, and the converter promises a 96.5% efficiency for 1 kW and a failure rate of 4.6216 × 106 failures per hour. The simulation and experimental results validate the converter’s performance, highlighting its superior efficiency, reliability, and scalability.

Zitieren

APA

Vijayanathan, S. N., Anbazhagan, L., Ali, J. S. M., Jayachandran, D. N., Vishnuram, P., Kalyan, C. N. S., Abdullah, M., & Rathore, R. S. (2025). Design of a Three-Input, Single-Output DC–DC Converter for Electric Charging Station. Energies, 18(4), 1005. https://doi.org/10.3390/en18041005

Vancouver

Vijayanathan SN, Anbazhagan L, Ali JSM, Jayachandran DN, Vishnuram P, Kalyan CNS, et al. Design of a Three-Input, Single-Output DC–DC Converter for Electric Charging Station. Energies. 2025;18(4):1005. doi:10.3390/en18041005

BibTeX
@article{Vijayanathan2025,
  author = {Vijayanathan, Sivaram Natarajan and Anbazhagan, Lavanya and Ali, Jagabar Sathik Mohamed and Jayachandran, Divya Navamani and Vishnuram, Pradeep and Kalyan, CH. Naga Sai and Abdullah, Mustafa and Rathore, Rajkumar Singh},
  title = {Design of a Three-Input, Single-Output DC–DC Converter for Electric Charging Station},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {4},
  pages = {1005},
  doi = {10.3390/en18041005}
}
Kostenlos starten →