First Wall Design of a Tokamak Pilot Plant Using a Monte Carlo Model for 3-D Heat Flux Deposition
IEEE Transactions on Plasma Science · 2026-06 · 54 (6) · 2846-2854
DOI: 10.1109/tps.2026.3688945 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Plasma Science, 2026-06. Verfasst von J. H. Nichols und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UT-Battelle, LLC, U.S. Department of Energy.
Abstract (Originalsprache)
We present a method for calculating the heat fluxes deposited on nonaxisymmetric tokamak first wall components, allowing for a first-of-its-kind model for power handling in the tokamak far scrape-off layer (SOL). The DIV3D Monte Carlo model features strict global power conservation and can calculate the finite cross-field plasma transport into magnetically-shadowed regions, which is significant when dealing with meter-scale shadows introduced by components such as poloidal limiters or antennas. As a case study, we apply the DIV3D model to inform the distribution of first wall poloidal limiters in an ARC-class reactor device. We demonstrate that discrete protection limiters can efficiently reduce peak heat fluxes on recessed breeder wall components in the presence of significant far-SOL plasma fluxes. By varying the toroidal periodicity and radial standoff depth of the limiters, we demonstrate one of the tradeoffs that must be considered in first wall design: more limiters provide greater protection, but at the cost of reduced breeding performance. We also present the impact that radial misalignments between limiters would have on first wall power loading.
Förderung
- UT-Battelle, LLC, U.S. Department of Energy
Zitieren
APA
Nichols, J. H., Borowiec, K., Lore, J. D., Unterberg, E. A., Bae, J. W., Oz, F., & Sircar, A. (2026). First Wall Design of a Tokamak Pilot Plant Using a Monte Carlo Model for 3-D Heat Flux Deposition. IEEE Transactions on Plasma Science, 54(6), 2846-2854. https://doi.org/10.1109/tps.2026.3688945
Vancouver
Nichols JH, Borowiec K, Lore JD, Unterberg EA, Bae JW, Oz F, et al. First Wall Design of a Tokamak Pilot Plant Using a Monte Carlo Model for 3-D Heat Flux Deposition. IEEE Transactions on Plasma Science. 2026;54(6):2846-2854. doi:10.1109/tps.2026.3688945
BibTeX
@article{Nichols2026,
author = {Nichols, J. H. and Borowiec, K. and Lore, J. D. and Unterberg, E. A. and Bae, J. W. and Oz, F. and Sircar, A.},
title = {First Wall Design of a Tokamak Pilot Plant Using a Monte Carlo Model for 3-D Heat Flux Deposition},
journal = {IEEE Transactions on Plasma Science},
year = {2026},
volume = {54},
number = {6},
pages = {2846--2854},
doi = {10.1109/tps.2026.3688945}
}
EUVIMED