EUVIMEDEUVIMED entdecken
Crossref

Study on Measurement Resolution Improvement Method of FBG Vibration Sensor Based on Noise Averaging Effect

Chenbo Yu, Xiangxiang Zhang, Daoyu Tian, Yutong Wu, Jingtao Xin

IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 9529008-9529008

DOI: 10.1109/tim.2026.3710307 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Chenbo Yu und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Research Project of Beijing Municipal Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the testing of fiber Bragg grating (FBG) vibration sensors, it was observed that the demodulation sampling rate significantly influences the acceleration measurement resolution. To investigate the underlying mechanism behind this influence, this study first establishes a theoretical model based on the noise averaging effect, describing the relationship between the sampling rate and the acceleration resolution. This model analyzes how the sampling frequency of the demodulation system affects the acceleration resolution of FBG vibration sensors in the presence of random noise. Subsequently, numerical simulations were performed to characterize the sampling rate-acceleration resolution relationship. The results indicate that the resolution follows a negative power function with increasing sampling rate: initially, the resolution improves rapidly as the sampling rate rises, but further increases lead to a gradual plateau in improvement. For experimental validation, a high-sensitivity FBG vibration sensor was fabricated with a sensitivity of 325 pm/g and a measurement bandwidth of 0–550 Hz. A comprehensive performance testing system for vibration sensors was also constructed to evaluate the acceleration resolution. Experimental results show that the measurement resolution improves by a factor of 2.42 as the sampling rate increases. The fitting function relationship between the measurement resolution and sampling rate is y = 14.74x ${}^{\mathrm {-0.497}}$ , which aligns well with theoretical predictions. Notably, when the sampling rate exceeds eight times the frequency of the measured signal, the measurement resolution tends to stabilize. This study systematically elucidates the mechanism by which the sampling frequency affects the acceleration resolution of FBG vibration sensors, providing valuable theoretical support and practical guidance for optimizing demodulation parameters and enhancing sensor performance in real-world applications.

Förderung

  • National Key Research and Development Program of China
  • Research Project of Beijing Municipal Natural Science Foundation

Zitieren

APA

Yu, C., Zhang, X., Tian, D., Wu, Y., & Xin, J. (2026). Study on Measurement Resolution Improvement Method of FBG Vibration Sensor Based on Noise Averaging Effect. IEEE Transactions on Instrumentation and Measurement, 75, 9529008-9529008. https://doi.org/10.1109/tim.2026.3710307

Vancouver

Yu C, Zhang X, Tian D, Wu Y, Xin J. Study on Measurement Resolution Improvement Method of FBG Vibration Sensor Based on Noise Averaging Effect. IEEE Transactions on Instrumentation and Measurement. 2026;75:9529008-9529008. doi:10.1109/tim.2026.3710307

BibTeX
@article{Yu2026,
  author = {Yu, Chenbo and Zhang, Xiangxiang and Tian, Daoyu and Wu, Yutong and Xin, Jingtao},
  title = {Study on Measurement Resolution Improvement Method of FBG Vibration Sensor Based on Noise Averaging Effect},
  journal = {IEEE Transactions on Instrumentation and Measurement},
  year = {2026},
  volume = {75},
  pages = {9529008--9529008},
  doi = {10.1109/tim.2026.3710307}
}
Kostenlos starten →