Continuous Wrist Angle Estimation Under Different Resistance Based on Dynamic EMG Decomposition
IEEE Transactions on Biomedical Engineering · 2026-01 · 73 (1) · 54-66
DOI: 10.1109/tbme.2025.3577002 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Biomedical Engineering, 2026-01. Verfasst von Xinhao Yang und 5 weiteren Autor:innen. Hauptthemen laut MEDLINE: Wrist, Electromyography. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Jiangsu Province, Key Research and Development Program of Jiangsu Province.
Abstract (Originalsprache)
Estimating wrist movements through neural drives is crucial in human-machine interface (HMI). However, studies on wrist movements mostly focused on isometric contractions, while research on dynamic EMG decomposition during non-stationary movements is notably scarce. Moreover, the impact of different resistance on the motor unit (MU) decomposition and wrist angle estimation remains unexplored. To address these gaps, this paper proposed a novel framework to decode neural drives from EMG signals during dynamic wrist movements. Specifically, the EMG signals were divided into short segments firstly. Next, progressive FastICA peel-off (PFP) algorithm was utilized to decompose each EMG segment into motor unit spike trains (MUST). Then, a linear window function was applied to track the motor units (MU) to obtain complete MUSTs. Three resistance levels were investigated during wrist flexion and extension: 20%, 40%, and 60% maximum voluntary contraction (MVC). Multiple linear regression (LR) and convolutional neural network (CNN) were used to estimate wrist angles within a range of ± 20° based on neural drives. Results showed the proposed framework could effectively identify MUs at these three resistance levels, with an average global pulse-to-noise ratio (PNR) above 20 dB. The determination coefficients of LR model were 0.92 ± 0.06, 0.91 ± 0.07, and 0.85 ± 0.13 at the three resistance levels, respectively, while those of CNN were 0.88 ± 0.10, 0.88 ± 0.11, and 0.81 ± 0.17. This study demonstrates it is feasible to estimate wrist angles based on decomposed neural drives at different resistance levels, and has significant implications for HMI development.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Förderung
- National Key Research and Development Program of China
- Natural Science Foundation of Jiangsu Province
- Key Research and Development Program of Jiangsu Province
- Basic Research Project of Leading Technology of Jiangsu Province
- National Natural Science Foundation of China
- Joint Fund Project
Zitieren
APA
Yang, X., Xu, B., Gao, Z., Ren, S., Li, H., & Song, A. (2026). Continuous Wrist Angle Estimation Under Different Resistance Based on Dynamic EMG Decomposition. IEEE Transactions on Biomedical Engineering, 73(1), 54-66. https://doi.org/10.1109/tbme.2025.3577002
Vancouver
Yang X, Xu B, Gao Z, Ren S, Li H, Song A. Continuous Wrist Angle Estimation Under Different Resistance Based on Dynamic EMG Decomposition. IEEE Transactions on Biomedical Engineering. 2026;73(1):54-66. doi:10.1109/tbme.2025.3577002
BibTeX
@article{Yang2026,
author = {Yang, Xinhao and Xu, Baoguo and Gao, Zelin and Ren, Shipeng and Li, Huijun and Song, Aiguo},
title = {Continuous Wrist Angle Estimation Under Different Resistance Based on Dynamic EMG Decomposition},
journal = {IEEE Transactions on Biomedical Engineering},
year = {2026},
volume = {73},
number = {1},
pages = {54--66},
doi = {10.1109/tbme.2025.3577002}
}
EUVIMED