EUVIMEDEUVIMED entdecken
Crossref

Design of Electrically Small Intraocular Antenna for Retinal Prosthesis System and Its Validation

Sumon Modak, Vikrant Kaim, Aijaz M Zaidi, Binod Kumar Kanaujia, Karumudi Rambabu

IEEE Transactions on Biomedical Engineering · 2024-12 · 71 (12) · 3402-3412

DOI: 10.1109/tbme.2024.3424199 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Biomedical Engineering, 2024-12. Verfasst von Sumon Modak und 4 weiteren Autor:innen. Hauptthemen laut MEDLINE: Visual Prosthesis, Prosthesis Design. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: Science and Engineering Research Board, EMEQ Scheme, Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

OBJECTIVE: This paper presents an ultra-miniaturized circular-shaped triple band microstrip antenna as an intraocular unit applicable for retinal prosthesis. METHODS: The reported antenna is developed by modifying a conventional circular-shaped patch with a pair of open-ended circular annular rings and a semicircular ring-loaded rectangular stub. Additionally, a shorting pin is used at the periphery of the patch to achieve the frequency bands of interest. Further, to make the structure electrically small and accommodate highly dense electrodes, the circular ground plane is modified by making symmetrical slots over the four quadrants and edges. Specific absorption rate distribution for 1 g and 10 g of different tissue layers over three operating frequencies has been studied by placing electromagnetic sources at different locations. RESULTS: With these arrangements, the proposed strip antenna offers multiband operation within the frequency band of 1.25 GHz (1.13-1.46 GHz), 2.45 GHz (2.24-2.66 GHz), and 3.32 GHz (3.09-3.50 GHz). Besides, circularly polarized radiation has also been achieved at 1.25 GHz with a 3-dB axial ratio bandwidth of 10 MHz. CONCLUSION: Finally, the proposed antenna structure is fabricated, and its measured performance metrics are in close aggreement with the simulated parameters. SIGNIFICANCE: The proposed antenna's performance inside a customized canonical eye model (DMCM) and anthropomorphic Zubal head model is studied and compared with the prior studies.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Visual ProsthesisProsthesis DesignHumansEquipment DesignRetina

Förderung

  • Science and Engineering Research Board
  • EMEQ Scheme
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Modak, S., Kaim, V., Zaidi, A. M., Kanaujia, B. K., & Rambabu, K. (2024). Design of Electrically Small Intraocular Antenna for Retinal Prosthesis System and Its Validation. IEEE Transactions on Biomedical Engineering, 71(12), 3402-3412. https://doi.org/10.1109/tbme.2024.3424199

Vancouver

Modak S, Kaim V, Zaidi AM, Kanaujia BK, Rambabu K. Design of Electrically Small Intraocular Antenna for Retinal Prosthesis System and Its Validation. IEEE Transactions on Biomedical Engineering. 2024;71(12):3402-3412. doi:10.1109/tbme.2024.3424199

BibTeX
@article{Modak2024,
  author = {Modak, Sumon and Kaim, Vikrant and Zaidi, Aijaz M and Kanaujia, Binod Kumar and Rambabu, Karumudi},
  title = {Design of Electrically Small Intraocular Antenna for Retinal Prosthesis System and Its Validation},
  journal = {IEEE Transactions on Biomedical Engineering},
  year = {2024},
  volume = {71},
  number = {12},
  pages = {3402--3412},
  doi = {10.1109/tbme.2024.3424199}
}
Kostenlos starten →