EUVIMEDEUVIMED entdecken
Crossref

A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub-$\mu$W Robust Wearable Sensing

Omar Faruqe, Daehyun Lee, Natalie B Ownby, Benton H Calhoun

IEEE Transactions on Biomedical Circuits and Systems · 2024

DOI: 10.1109/tbcas.2024.3420871 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Biomedical Circuits and Systems, 2024. Verfasst von Omar Faruqe und 3 weiteren Autor:innen. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Electric Capacitance, Equipment Design. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 21 Literaturangaben. Gefördert von: Sandia National Laboratories’ Laboratory Directed Research and Development program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a 10-channel, 120 nW/channel, reconfigurable capacitance-to-digital converter (CDC) enabling sub- μW wearable sensing applications. The proposed multi-channel architecture supports 10 channels with a shared reconfigurable 6-bit differential analog-to-digital converter (ADC). The reconfigurable nature of the CDC enables adaptive sensing range and sensing speed based on the target application. Furthermore, the architecture performs both on/off-chip parasitic correction and baseline calibration to measure the change in capacitance ( ∆C), excluding baseline and parasitic capacitances. The experimental results show the measurement range of ∆C are 5.34 pF for 1x sensitivity and 1.8 pF for 3x sensitivity respectively. The capacitive divider-based architecture excludes power-hungry operational trans-impedance amplifiers for capacitance to voltage conversion, and the architecture supports programmable channel access to activate or deactivate each channel independently. The random interrupt protection logic avoids any broken sample or data error in a sampling window. Additionally, the channel monitoring logic helps keep track of specific channel information. The measured silicon result shows a total power consumption of 1.2 μW for 1.6 kHz sampling frequency when driven by a 32 kHz clock, which is 8.6x less than prior works. The CDC is also tested with DMMP (dimethyl-methylphosphonate) gas sensor in gas chromatography (GC). Implemented in 65 nm CMOS process, the 10-channel CDC occupies 0.251 mm2 of active area (0.0251 mm2/Ch).

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Wearable Electronic DevicesElectric CapacitanceEquipment DesignHumansAnalog-Digital ConversionSignal Processing, Computer-Assisted

Förderung

  • Sandia National Laboratories’ Laboratory Directed Research and Development program

Zitieren

APA

Faruqe, O., Lee, D., Ownby, N. B., & Calhoun, B. H. (2024). A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub-$\mu$W Robust Wearable Sensing. IEEE Transactions on Biomedical Circuits and Systems. https://doi.org/10.1109/tbcas.2024.3420871

Vancouver

Faruqe O, Lee D, Ownby NB, Calhoun BH. A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub-$\mu$W Robust Wearable Sensing. IEEE Transactions on Biomedical Circuits and Systems. 2024. doi:10.1109/tbcas.2024.3420871

BibTeX
@article{Faruqe2024,
  author = {Faruqe, Omar and Lee, Daehyun and Ownby, Natalie B and Calhoun, Benton H},
  title = {A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub-$\mu$W Robust Wearable Sensing},
  journal = {IEEE Transactions on Biomedical Circuits and Systems},
  year = {2024},
  doi = {10.1109/tbcas.2024.3420871}
}
Kostenlos starten →