EUVIMEDEUVIMED entdecken
Crossref

Observer-Based Fuzzy Adaptive Dynamic Surface Force Control for Pneumatic Polishing System End-Effector With Uncertain Contact Environment Model

Zhiguo Yang, Wenbo Zhao, Jiange Kou, Yushan Ma, Zhibo Sun, Yixuan Wang, Yan Shi

IEEE Transactions on Automation Science and Engineering · 2025 · 22 · 17898-17913

DOI: 10.1109/tase.2025.3585136 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Automation Science and Engineering, 2025. Verfasst von Zhiguo Yang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China Basic Research Program for Ph.D. Students, Youth Fund of National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents an observer-based adaptive fuzzy dynamic surface force control strategy for pneumatic polishing system with uncertain contact environment model and full-state constraints. First, a fuzzy logic system is employed to approximate the uncertain nonlinear dynamics of the pneumatic polishing system end-effector, and a fuzzy state observer is designed to estimate the unmeasured states. Further, to enhance the controller’s response speed, a variable separation method employing fuzzy basis functions and the dynamic surface control technique are adopted to address algebraic loop issues and prevent computational complexity explosion. A logarithmic-type barrier Lyapunov function is embedded into each step of the controller design to ensure that all system states satisfy the predefined constraints. Finally, an adaptive fuzzy dynamic surface force controller with full-state constraints is developed to ensure fast and accurate control of the polishing force in an uncertain contact environment while maintaining all states within predefined constraints. The effectiveness and applicability of the proposed control algorithm are experimentally verified using a pneumatic polishing system. Note to Practitioners—The goal of this study was to investigate an adaptive fuzzy dynamic surface force control strategy for pneumatic polishing system with uncertain contact environment model and full-state constraints. Current pneumatic polishing force control schemes generally have low accuracy owing to dynamic time-varying contact characteristics that cannot be accurately modeled; therefore, this study proposes an adaptive fuzzy dynamic surface force control method that approximates model uncertainty and nonlinear functions using a fuzzy logic system. In addition, to improve the slow response speed of the polishing force, which easily leads to over- or under-polishing, the operational complexity of the controller is reduced by introducing a variable separation method based on a fuzzy basis function and dynamic surface control. This approach avoids problems such as component damage or poor machining consistency due to untimely adjustment of the polishing force. The stability and convergence of the proposed algorithm are theoretically analyzed, and its superiority and applicability are verified in polishing force control experiments.

Förderung

  • National Natural Science Foundation of China Basic Research Program for Ph.D. Students
  • Youth Fund of National Natural Science Foundation of China

Zitieren

APA

Yang, Z., Zhao, W., Kou, J., Ma, Y., Sun, Z., Wang, Y., & Shi, Y. (2025). Observer-Based Fuzzy Adaptive Dynamic Surface Force Control for Pneumatic Polishing System End-Effector With Uncertain Contact Environment Model. IEEE Transactions on Automation Science and Engineering, 22, 17898-17913. https://doi.org/10.1109/tase.2025.3585136

Vancouver

Yang Z, Zhao W, Kou J, Ma Y, Sun Z, Wang Y, et al. Observer-Based Fuzzy Adaptive Dynamic Surface Force Control for Pneumatic Polishing System End-Effector With Uncertain Contact Environment Model. IEEE Transactions on Automation Science and Engineering. 2025;22:17898-17913. doi:10.1109/tase.2025.3585136

BibTeX
@article{Yang2025,
  author = {Yang, Zhiguo and Zhao, Wenbo and Kou, Jiange and Ma, Yushan and Sun, Zhibo and Wang, Yixuan and Shi, Yan},
  title = {Observer-Based Fuzzy Adaptive Dynamic Surface Force Control for Pneumatic Polishing System End-Effector With Uncertain Contact Environment Model},
  journal = {IEEE Transactions on Automation Science and Engineering},
  year = {2025},
  volume = {22},
  pages = {17898--17913},
  doi = {10.1109/tase.2025.3585136}
}
Kostenlos starten →