Inverse Design Method for Nonparametric Frequency-Selective Surface With Wideband and Wide-Angle Stability
IEEE Transactions on Antennas and Propagation · 2026-07 · 74 (7) · 6657-6670
DOI: 10.1109/tap.2026.3684002 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2026-07. Verfasst von Hao-Chen Guo und 1 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Aeronautical Science Foundation of China, Shenzhen Science and Technology Program.
Abstract (Originalsprache)
A inverse method for nonparametric frequency-selective surfaces (FSSs) is proposed to enrich the means of designing complex performance FSSs. By applying the correct constraints, the topological equivalence relationship between the nonparametric model and the expected circuit is established, and this relationship is used to find the initial structure and the optimized model with the physical significance. And then, the bandwidth is directly used as the objective function instead of the weight function, which improves the stability of the objective function in the iterative process. On this basis, the adjoint sensitivity analysis method of periodic boundaries is applied. A topology optimization method suitable for bandpass FSS is proposed, which achieved wideband stability at large angles using as few metal layers as possible. To further validate the universality of the method, we introduced the transmission theory of dielectric, and thin substrate FSS, thick substrate FSS, and multilayer substrate FSS are analyzed and designed separately. The optimized FSS is insensitive to polarization and has a −3-dB bandwidth of over 30% under 60° oblique incidence condition. The measurement results are in good agreement with the simulation results. The results indicate that this is an effective design method for stable wideband response at large incident angles, which does not rely on initial models and can be used for frequency-selective radomes design in various complex environments and applications. This approach can fully utilize the design potential of the metal layer and achieve good performance with a relatively simple whole structure.
Förderung
- National Natural Science Foundation of China
- Aeronautical Science Foundation of China
- Shenzhen Science and Technology Program
Zitieren
APA
Guo, H., & Ding, X. (2026). Inverse Design Method for Nonparametric Frequency-Selective Surface With Wideband and Wide-Angle Stability. IEEE Transactions on Antennas and Propagation, 74(7), 6657-6670. https://doi.org/10.1109/tap.2026.3684002
Vancouver
Guo H, Ding X. Inverse Design Method for Nonparametric Frequency-Selective Surface With Wideband and Wide-Angle Stability. IEEE Transactions on Antennas and Propagation. 2026;74(7):6657-6670. doi:10.1109/tap.2026.3684002
BibTeX
@article{Guo2026,
author = {Guo, Hao-Chen and Ding, Xiao},
title = {Inverse Design Method for Nonparametric Frequency-Selective Surface With Wideband and Wide-Angle Stability},
journal = {IEEE Transactions on Antennas and Propagation},
year = {2026},
volume = {74},
number = {7},
pages = {6657--6670},
doi = {10.1109/tap.2026.3684002}
}
EUVIMED