EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Miniaturized Design of Dual Transmission Frequency Selective Rasorber With Wide Angular Stability

Mehran Manzoor Zargar, Archana Rajput, Kushmanda Saurav

IEEE Open Journal of Antennas and Propagation · 2024-08 · 5 (4) · 922-932

DOI: 10.1109/ojap.2024.3382834 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Open Journal of Antennas and Propagation, 2024-08. Verfasst von Mehran Manzoor Zargar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Defence Research and Development Organisation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a miniaturized design of dual transmission frequency selective rasorber (FSR) with absorption-transmission-absorption-transmission (A-T-A-T) feature is proposed. Initially, lowfrequency resonators are incorporated on the square ring shaped lossy resistive layer for expanding the broad absorption towards the lower spectrum of frequency. Then the dual bandpass frequency selective surface (FSS) with transmission bands lying within the absorption spectrum is integrated with the resistive layer. Further, a cross-loop resonator is integrated inside the square ring of the resistive layer due to which a dual transmission pole is achieved through the resistive layer aligning with the dual operating frequencies of bandpass FSS. The proposed structure exhibits two broad absorption bands ranging from 3.7.10.5 GHz (95.7%) and 12.6.14.6 GHz (14.70%). The two transmission bands are at 10.7 GHz (8.62%) and 16.0 GHz (8.75%) with minimum insertion loss of 1.0 dB and 0.7 dB, respectively. The proposed FSR is polarization-insensitive and a compact design with an electrical size of $0.015\lambda^{2}$ and a thickness of $0.08\lambda$ along with a wide angular stability up to 50o incidence. The working process of the proposed design is illustrated by studying an equivalent circuit model (ECM). Further, a prototype of 23 × 23 array is fabricated and the measurements are carried out for both normal and oblique incidences. The close resemblance observed between the measured and simulated response experimentally validates the proposed FSR design.

Förderung

  • Defence Research and Development Organisation

Zitieren

APA

Zargar, M. M., Rajput, A., & Saurav, K. (2024). Miniaturized Design of Dual Transmission Frequency Selective Rasorber With Wide Angular Stability. IEEE Open Journal of Antennas and Propagation, 5(4), 922-932. https://doi.org/10.1109/ojap.2024.3382834

Vancouver

Zargar MM, Rajput A, Saurav K. Miniaturized Design of Dual Transmission Frequency Selective Rasorber With Wide Angular Stability. IEEE Open Journal of Antennas and Propagation. 2024;5(4):922-932. doi:10.1109/ojap.2024.3382834

BibTeX
@article{Zargar2024,
  author = {Zargar, Mehran Manzoor and Rajput, Archana and Saurav, Kushmanda},
  title = {Miniaturized Design of Dual Transmission Frequency Selective Rasorber With Wide Angular Stability},
  journal = {IEEE Open Journal of Antennas and Propagation},
  year = {2024},
  volume = {5},
  number = {4},
  pages = {922--932},
  doi = {10.1109/ojap.2024.3382834}
}
Kostenlos starten →