EUVIMEDEUVIMED entdecken
Crossref

Mechanically Beam-Scanning Fabry–Pérot Antenna Integrated With LED Matrix Display

Chuangkai Wang, Zhixi Liang, Yin Li, Steven Gao, Shao Yong Zheng

IEEE Transactions on Antennas and Propagation · 2026-01 · 74 (1) · 173-183

DOI: 10.1109/tap.2025.3627682 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2026-01. Verfasst von Chuangkai Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: National Key Research and Development Program of China, part by Research Grants Council (RGC) Hong Kong.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents the seamless integration of a mechanically beam-scanning Fabry–Pérot (FP) cavity antenna with an LED matrix display for smart display applications. A microstrip magnetic dipole antenna serves as the feeding antenna to excite the TM mode of the FP cavity. One-sided beam scanning is achieved by positioning the feeding antenna at the cavity edge and mechanically adjusting the FP cavity height. However, significant sidelobes and gain reduction emerge when the main lobe is directed toward broadside and large scanning angles. Theoretical analysis indicates these issues result from TEM wave radiation, TM wave reflection, and large attenuation constants. Several approaches are implemented to modify the FP cavity for sidelobe suppression and gain improvement. The antenna-display integration is accomplished through a dual-functional partially reflective surface (PRS), which simultaneously reflects RF signals, transmits power, and displays control signals for the LED matrix. Display pixels are positioned on the PRS, with minimal impact on antenna performance by locating them in regions of low field intensity. For verification, a prototype is simulated, fabricated, and measured. The measured impedance bandwidth spans 5.2–6.1 GHz (15.9%). The maximum gain is 12.5 dBi, with gain variation below 1.4 dB across 5.2–5.8 GHz (10.9%). The beam scanning range is 0°–34°, with sidelobe levels (SLLs) below −6.3 dB and scan losses under 0.9 dB. The prototype successfully demonstrates simultaneous operation as a beam-scanning antenna and a $26\,\times \,\text{30}$ -pixel display.

Förderung

  • National Key Research and Development Program of China
  • part by Research Grants Council (RGC) Hong Kong

Zitieren

APA

Wang, C., Liang, Z., Li, Y., Gao, S., & Zheng, S. Y. (2026). Mechanically Beam-Scanning Fabry–Pérot Antenna Integrated With LED Matrix Display. IEEE Transactions on Antennas and Propagation, 74(1), 173-183. https://doi.org/10.1109/tap.2025.3627682

Vancouver

Wang C, Liang Z, Li Y, Gao S, Zheng SY. Mechanically Beam-Scanning Fabry–Pérot Antenna Integrated With LED Matrix Display. IEEE Transactions on Antennas and Propagation. 2026;74(1):173-183. doi:10.1109/tap.2025.3627682

BibTeX
@article{Wang2026,
  author = {Wang, Chuangkai and Liang, Zhixi and Li, Yin and Gao, Steven and Zheng, Shao Yong},
  title = {Mechanically Beam-Scanning Fabry–Pérot Antenna Integrated With LED Matrix Display},
  journal = {IEEE Transactions on Antennas and Propagation},
  year = {2026},
  volume = {74},
  number = {1},
  pages = {173--183},
  doi = {10.1109/tap.2025.3627682}
}
Kostenlos starten →