EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Additively Manufactured Waveguide Orthomode Transducer in the K-Band for Dual-Circular Polarization Broadband Satellite Antennas

Jose Rico-Fernandez, Guillermo Menendez, Manuel Arrebola, Nelson J. G. Fonseca

IEEE Open Journal of Antennas and Propagation · 2026-08 · 7 (4) · 1167-1175

DOI: 10.1109/ojap.2026.3682156 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Open Journal of Antennas and Propagation, 2026-08. Verfasst von Jose Rico-Fernandez und 3 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: European Space Agency, Ministerio de Ciencia, Innovaci?n y Universidades.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two compact orthomode transducers (OMTs), one providing dual-linear polarization and one providing dual-circular polarization, are presented for broadband K-band satellite communication antennas over 17.7–20.2 GHz. The contribution of this work is not limited to the use of Laser Powder Bed Fusion (LPBF) additive manufacturing, but lies in the co-design-for-manufacturing adaptation of compact waveguide OMT architectures to enable monolithic metallic realization under LPBF constraints. In the dual-linear case, a previously reported compact two-probe concept is re-designed with additive-manufacturing-compatible matching and enclosure features. In the dual-circular case, a Riblet-coupler-based architecture is integrated with the compact OMT concept and adapted to LPBF manufacturing through geometry modifications compatible with overhang, wall-thickness, and printing-orientation limitations. For experimental validation, both OMTs are manufactured in AlSi10Mg and tested using transitions to WR42 waveguide and a conical horn antenna. Measured results show return loss and port-to-port isolation better than 25.2 dB and 18.1 dB for the dual-linear OMT, and 22.4 dB and 23.8 dB for the dual-circular OMT, in good agreement with simulations. The demonstrated combination of electromagnetic design and LPBF-oriented mechanical adaptation is of interest for compact, lightweight, and monolithic dual-polarized waveguide components and array antennas in the millimeter-wave band.

Förderung

  • European Space Agency
  • Ministerio de Ciencia, Innovaci?n y Universidades

Zitieren

APA

Rico-Fernandez, J., Menendez, G., Arrebola, M., & Fonseca, N. J. G. (2026). Additively Manufactured Waveguide Orthomode Transducer in the K-Band for Dual-Circular Polarization Broadband Satellite Antennas. IEEE Open Journal of Antennas and Propagation, 7(4), 1167-1175. https://doi.org/10.1109/ojap.2026.3682156

Vancouver

Rico-Fernandez J, Menendez G, Arrebola M, Fonseca NJG. Additively Manufactured Waveguide Orthomode Transducer in the K-Band for Dual-Circular Polarization Broadband Satellite Antennas. IEEE Open Journal of Antennas and Propagation. 2026;7(4):1167-1175. doi:10.1109/ojap.2026.3682156

BibTeX
@article{RicoFernandez2026,
  author = {Rico-Fernandez, Jose and Menendez, Guillermo and Arrebola, Manuel and Fonseca, Nelson J. G.},
  title = {Additively Manufactured Waveguide Orthomode Transducer in the K-Band for Dual-Circular Polarization Broadband Satellite Antennas},
  journal = {IEEE Open Journal of Antennas and Propagation},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {1167--1175},
  doi = {10.1109/ojap.2026.3682156}
}
Kostenlos starten →