Integration of Thin-Film Strain Gauges Into Additively Manufactured Components Using Laser-Based Directed Energy Deposition
IEEE Sensors Letters · 2026-09 · 10 (9) · 5000704-5000704
DOI: 10.1109/lsens.2026.3717440 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Letters, 2026-09. Verfasst von Eileen Muller und 6 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.
Abstract (Originalsprache)
The integration of strain gauges directly into additively manufactured metal components enables embedded sensing solutions for in situ structural health monitoring by the precise measurement of internal strain. Due to the harsh process conditions during the integration, e.g., in laser-based directed energy deposition (DED-LB), the sensor systems need to withstand high temperatures up to 1440°C. To achieve this the sensor systems consist of an NiCr (50/50 wt.%) sensor layer embedded between Al2O3 insulation layers, with Tantal diffusion barriers to ensure thermal stability. The multilayer sensor system was fabricated on stainless steel substrates (316L) and subsequently integrated into additively manufactured components during the DED-LB process using stainless steel (17-4PH). Integrating substrates with different thicknesses showed significant thermal degradation for thinner substrates (200–500 μm), including partial melting and insulation delamination, whereas 1000 μm substrates enabled more stable integration conditions. During sensor integration, variations in laser power, feed rate, and hatching strongly influenced the sensor functionality. Electrical characterization showed the lowest resistance reduction of the sensors of 8% integrated with 800 W laser power, 2000 mm/min feed rate, and 1.5 mm hatching on 1000-μm-thick sensor substrates. Cross-sectional energy-dispersive X-ray analysis showed intact sensor and insulation layer. These findings demonstrate the feasibility of embedding thin-film strain gauges into additively manufactured structures via DED-LB and provide a foundation for future development of robust in situ structural health monitoring systems for additively manufactured components.
Zitieren
APA
Muller, E., Bachert, L., Petersen, H., Aurich, J., Klaas, D., Dencker, F., & Wurz, M. C. (2026). Integration of Thin-Film Strain Gauges Into Additively Manufactured Components Using Laser-Based Directed Energy Deposition. IEEE Sensors Letters, 10(9), 5000704-5000704. https://doi.org/10.1109/lsens.2026.3717440
Vancouver
Muller E, Bachert L, Petersen H, Aurich J, Klaas D, Dencker F, et al. Integration of Thin-Film Strain Gauges Into Additively Manufactured Components Using Laser-Based Directed Energy Deposition. IEEE Sensors Letters. 2026;10(9):5000704-5000704. doi:10.1109/lsens.2026.3717440
BibTeX
@article{Muller2026,
author = {Muller, Eileen and Bachert, Lars and Petersen, Hilke and Aurich, Jan and Klaas, Daniel and Dencker, Folke and Wurz, Marc Christopher},
title = {Integration of Thin-Film Strain Gauges Into Additively Manufactured Components Using Laser-Based Directed Energy Deposition},
journal = {IEEE Sensors Letters},
year = {2026},
volume = {10},
number = {9},
pages = {5000704--5000704},
doi = {10.1109/lsens.2026.3717440}
}
EUVIMED