Mechanically Interlocked Multimaterial 3D-Printed Piezoelectret Sensors With Print-in-Place Architecture
IEEE Sensors Letters · 2026-07 · 10 (7) · 2502604-2502604
DOI: 10.1109/lsens.2026.3698280 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Letters, 2026-07. Verfasst von Carol R. Derla und 4 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben.
Abstract (Originalsprache)
Additive manufacturing enables the rapid customization of flexible piezoelectret sensors for a range of applications, yet its potential is currently limited by poor interfacial adhesion between polypropylene (PP), which is a good charge retaining material, and thermoplastic polyurethane (TPU). Here, we present a print-in-place interlocking strategy in which PP and TPU are codeposited layer-by-layer from the first layer, creating an intercalated architecture that mechanically locks the PP within a flexible structure made from both a conductive TPU (cTPU) and a foaming TPU (fTPU), without relying on interfacial adhesion or post printing assembly techniques. This method allows direct fabrication of a 0.6 mm tall air gap inside a PP cell, suitable for piezoelectret functionalization, with integrated cTPU electrodes and an encapsulating fTPU structure. After polarization, the sensor achieves a quasi-static linear force sensitivity of 284pC/N over a 1$\rm { cm}^{2}$ rectangular active area. This print-in-place interlocking strategy eliminates assembly and bonding steps, enabling on-demand production of personalized, flexible piezoelectret devices. Potential application areas are numerous, thanks to the design freedom given by 3-D printing fabrication, including biomedical and robotic pressure sensing.
Zitieren
APA
Derla, C. R., Altmann, A. A., Kupnik, M., Krijnen, G., & Canyelles-Pericas, P. (2026). Mechanically Interlocked Multimaterial 3D-Printed Piezoelectret Sensors With Print-in-Place Architecture. IEEE Sensors Letters, 10(7), 2502604-2502604. https://doi.org/10.1109/lsens.2026.3698280
Vancouver
Derla CR, Altmann AA, Kupnik M, Krijnen G, Canyelles-Pericas P. Mechanically Interlocked Multimaterial 3D-Printed Piezoelectret Sensors With Print-in-Place Architecture. IEEE Sensors Letters. 2026;10(7):2502604-2502604. doi:10.1109/lsens.2026.3698280
BibTeX
@article{Derla2026,
author = {Derla, Carol R. and Altmann, Alexander A. and Kupnik, Mario and Krijnen, Gijs and Canyelles-Pericas, Pep},
title = {Mechanically Interlocked Multimaterial 3D-Printed Piezoelectret Sensors With Print-in-Place Architecture},
journal = {IEEE Sensors Letters},
year = {2026},
volume = {10},
number = {7},
pages = {2502604--2502604},
doi = {10.1109/lsens.2026.3698280}
}
EUVIMED