Flexible Capacitive Pressure Sensor With Inverted Conical Structure: Based on 3D-Printed Silicone Rubber/Silver Electrodes for Robotic and Human Motion Detection
IEEE Sensors Journal · 2025-12 · 25 (24) · 44850-44858
DOI: 10.1109/jsen.2025.3626548 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, 2025-12. Verfasst von Lupeng Lin und 13 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: Natural Science Foundation of Jilin Province, Industrialization Cultivation Project of the Jilin Provincial Department of Education, National Natural Science Foundation of China.
Abstract (Originalsprache)
With the rapid development of the Internet of Things and artificial intelligence, the demand for flexible tactile sensors in fields such as smart health monitoring and flexible electronic devices is rapidly growing. This study presents a capacitive pressure sensor featuring an inverted cone structure, fabricated by combining 3-D printing with layer-by-layer (LbL) assembly. This approach significantly enhances production efficiency while facilitating the fabrication of intricate microstructures. Silicone rubber (SR) was selected as the flexible substrate owing to its inherent compliance and versatility. Conductive silver paste served as the electrode material to guarantee electrical conductivity and operational stability. The synergistic integration of this design with the fabrication methodology proposes a novel approach for enhancing capacitive pressure sensor performance. Structural optimization was conducted using COMSOL Multiphysics simulations. The optimized sensor exhibited a sensitivity of 0.1 N-1 within the 09-N pressure range, a minimum hysteresis error of 3.9%, a force resolution of 0.05 N, and a detection limit of 0.1 N. Furthermore, the sensor demonstrated excellent stability and reliability across varying temperatures, frequencies, and during 1000 operational cycles, exhibiting a response time of 12.5 ms and a recovery time of 25 ms. Experimental results confirmed the sensor’s robust performance in robustness testing, object classification via robotic grippers, and human motion monitoring applications. These excellent performance characteristics highlight its significant potential for applications in smart wearables, medical devices, and tactile perception in robotic systems.
Förderung
- Natural Science Foundation of Jilin Province
- Industrialization Cultivation Project of the Jilin Provincial Department of Education
- National Natural Science Foundation of China
Zitieren
APA
Lin, L., Xu, D., Shi, R., Wang, L., Li, B., Li, S., Xun, W., Fan, Y., Xie, K., Li, X., Lin, Z., Deng, R., Wu, Z., & Guo, X. (2025). Flexible Capacitive Pressure Sensor With Inverted Conical Structure: Based on 3D-Printed Silicone Rubber/Silver Electrodes for Robotic and Human Motion Detection. IEEE Sensors Journal, 25(24), 44850-44858. https://doi.org/10.1109/jsen.2025.3626548
Vancouver
Lin L, Xu D, Shi R, Wang L, Li B, Li S, et al. Flexible Capacitive Pressure Sensor With Inverted Conical Structure: Based on 3D-Printed Silicone Rubber/Silver Electrodes for Robotic and Human Motion Detection. IEEE Sensors Journal. 2025;25(24):44850-44858. doi:10.1109/jsen.2025.3626548
BibTeX
@article{Lin2025,
author = {Lin, Lupeng and Xu, Decheng and Shi, Rongwei and Wang, Liang and Li, Bin and Li, Shusong and Xun, Wuheng and Fan, Yuhang and Xie, Ke and Li, Xianghui and Lin, Zihan and Deng, Rui and Wu, Zhuo and Guo, Xiaohui},
title = {Flexible Capacitive Pressure Sensor With Inverted Conical Structure: Based on 3D-Printed Silicone Rubber/Silver Electrodes for Robotic and Human Motion Detection},
journal = {IEEE Sensors Journal},
year = {2025},
volume = {25},
number = {24},
pages = {44850--44858},
doi = {10.1109/jsen.2025.3626548}
}
EUVIMED