An Improved Combined Framework of Force Measurement With Friction Model for Harmonic Gear
IEEE Sensors Journal · 01.05.2023 · 23 (9) · 9943-9951
DOI: 10.1109/jsen.2023.3262196 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 01.05.2023. Verfasst von Jing Luo und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 20 Literaturangaben. Gefördert von: National Nature Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
To obtain accurate output torque of robot joint for torque control, a built-in torque sensor is designed in this article. To enhance the performance of harmonic gear (HG), it is urgent to deal with the key issues in terms of the errors of sensing and positioning, and torque ripple interference. To handle these aforementioned key issues, four pairs of symmetrically distributed strain gauges are pasted on the bottom of the flexspline. Then, a precise positioning method based on laser marking is proposed to improve the positioning accuracy of the strain gauges. Moreover, Kalman filter (KF) is utilized to reduce torque ripple interference in the output signal of the strain gauges. Additionally, the designed device is evaluated by experimental tests which are conducted on prototype trial production. Synchronously, the relationship between the flexspline torque and the joint output torque is verified and the polynomial is used to represent the relationship of the measured torque for the built-in torque sensor and the standard torque sensor in the static and dynamic conditions. Finally, a friction model is presented and identified. Comprehensive comparative experiments is performed the performance of the build-in torque sensor in terms of estimation accuracy and control and it shows that the designed built-in torque sensor with friction compensation (FC) can be improved ten times in comparison with that of without FC in terms of steady-state mean error and mean value of measurement error. What is more, this designed build-in torque sensor holds tremendous potential for making the compact and lightweight motion joint module, especially for cooperative robot and robotic supernumerary limb.
Förderung
- National Nature Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Luo, J., Peng, D., Liu, C., Tang, B., Pang, M., & Xiang, K. (2023). An Improved Combined Framework of Force Measurement With Friction Model for Harmonic Gear. IEEE Sensors Journal, 23(9), 9943-9951. https://doi.org/10.1109/jsen.2023.3262196
Vancouver
Luo J, Peng D, Liu C, Tang B, Pang M, Xiang K. An Improved Combined Framework of Force Measurement With Friction Model for Harmonic Gear. IEEE Sensors Journal. 2023;23(9):9943-9951. doi:10.1109/jsen.2023.3262196
BibTeX
@article{Luo2023,
author = {Luo, Jing and Peng, Dakun and Liu, Changcheng and Tang, Biwei and Pang, Muye and Xiang, Kui},
title = {An Improved Combined Framework of Force Measurement With Friction Model for Harmonic Gear},
journal = {IEEE Sensors Journal},
year = {2023},
volume = {23},
number = {9},
pages = {9943--9951},
doi = {10.1109/jsen.2023.3262196}
}
EUVIMED