EUVIMEDEUVIMED entdecken
Crossref

Friction and wear properties of gear materials polyoxymethylene (POM) combined with polyamide 66 (PA66)

Xinmin Li, Yifan Qian, Changjian Yan, Xinyuan Shen, Wing San Tony Hung

Journal of Polymer Engineering · 24.07.2026 · 46 (6) · 433-444

DOI: 10.1515/polyeng-2025-0183 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Engineering, online erschienen am 03.06.2026. Verfasst von Xinmin Li und 4 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyoxymethylene (POM) and polyamide 66 (PA66) exhibit extensive utilization in gear systems owing to their superior self-lubricating capabilities, elevated thermal stability, and favorable anti-frictional characteristics. As for metals, different mateal combinations can prevent abrasive wear because of small surface energy. How is the tribological properties of POM combined with PA66? In this study, the influence of PV value on the tribological properties of PA66 and POM are researched by using a pin-on-disk friction test device. The result shows that under high PV conditions, the friction coefficient and wear rate of the PA66-POM and POM-PA66 sliding combinations are consistently lower than those of POM-POM and PA66-PA66 due to the transfer film layer which effectively reduces the impact of friction heat on the contact surface. In addition, the wear mechanism of PA66-PA66 and POM-POM sliding combinations is mainly adhesive wear, whereas the wear mechanism of PA66-POM and POM-PA66 sliding combinations is abrasive wear and adhesive wear. For the PA66-POM and POM-PA66 sliding combination, grease destroys the formation of the transfer film, which increases the wear rate at high PV values.

Zitieren

APA

Li, X., Qian, Y., Yan, C., Shen, X., & Hung, W. S. T. (2026). Friction and wear properties of gear materials polyoxymethylene (POM) combined with polyamide 66 (PA66). Journal of Polymer Engineering, 46(6), 433-444. https://doi.org/10.1515/polyeng-2025-0183

Vancouver

Li X, Qian Y, Yan C, Shen X, Hung WST. Friction and wear properties of gear materials polyoxymethylene (POM) combined with polyamide 66 (PA66). Journal of Polymer Engineering. 2026;46(6):433-444. doi:10.1515/polyeng-2025-0183

BibTeX
@article{Li2026,
  author = {Li, Xinmin and Qian, Yifan and Yan, Changjian and Shen, Xinyuan and Hung, Wing San Tony},
  title = {Friction and wear properties of gear materials polyoxymethylene (POM) combined with polyamide 66 (PA66)},
  journal = {Journal of Polymer Engineering},
  year = {2026},
  volume = {46},
  number = {6},
  pages = {433--444},
  doi = {10.1515/polyeng-2025-0183}
}
Kostenlos starten →