Fabry--Perot Interferometry for Ultraviolet Photolithography Masks: Principle, Proof of Concept, and Optical Design Analysis
Journal of Microelectromechanical Systems · 2026-08 · 35 (4) · 689-701
DOI: 10.1109/jmems.2026.3691968 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Microelectromechanical Systems, 2026-08. Verfasst von Md Iftekharul Islam und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: Mitacs Business Strategy Internship (BSI) Program, Digitho Technologies Inc., Laboratoire Nanotechnologies & Nanosystèmes (LN2), a joint International Research Laboratory (IRL 3463) operated in Canada by the Université de Sherbrooke.
Abstract (Originalsprache)
The increasing complexity and cost of photomasks in semiconductor manufacturing have motivated the exploration of reprogrammable alternatives compatible with existing ultraviolet photolithography systems. This study presents a validation of Fabry–Perot interferometry for reconfigurable photomask applications, focusing on the optical design space of Fabry–Perot pixels composed of high-refractive-index reflective films separated by sub-micrometer air cavities. Optical simulations were used to map the transmittance behavior across film thicknesses and cavity lengths and identify optimal design conditions producing transmittance maxima near unity and minima around 0.15, corresponding to a modulation contrast of ~0.85. Fixed-cavity Fabry–Perot pixels were fabricated on fused silica substrates using sputtered films with a refractive index of ~1.98 and different sacrificial layer thicknesses to vary the air cavity. Lithography experiments performed at the i-line wavelength (365 nm) confirmed the predicted transmission behavior, with full resist development for cavities ranging from 150 nm to 190 nm and ~75–80% resist retention for 270 nm and 290 nm cavities, consistent with the constructive and destructive interference states separated by ~80 nm of air cavity thickness, a quarter of the incident wavelength. The measured resist-remaining percentage followed the simulated transmission modulation, validating the optical model. These results suggest that the Fabry–Perot principle with high-refractive-index materials is a viable option to create reprogrammable photomasks that can provide high contrast and reconfigurable optical control within stepper-compatible lithography platforms.[2026-0029]
Förderung
- Mitacs Business Strategy Internship (BSI) Program
- Digitho Technologies Inc.
- Laboratoire Nanotechnologies & Nanosystèmes (LN2), a joint International Research Laboratory (IRL 3463) operated in Canada by the Université de Sherbrooke
- France by the Centre National de la Recherche Scientifique
- Institut National des Sciences Appliquées de Lyon (INSA Lyon), the École Centrale de Lyon (ECL), and the Université Grenoble Alpes
Zitieren
APA
Islam, M. I., Amnache, A., Beaudry, R., Delafosse, M., Ecoffey, S., & Frechette, L. G. (2026). Fabry--Perot Interferometry for Ultraviolet Photolithography Masks: Principle, Proof of Concept, and Optical Design Analysis. Journal of Microelectromechanical Systems, 35(4), 689-701. https://doi.org/10.1109/jmems.2026.3691968
Vancouver
Islam MI, Amnache A, Beaudry R, Delafosse M, Ecoffey S, Frechette LG. Fabry--Perot Interferometry for Ultraviolet Photolithography Masks: Principle, Proof of Concept, and Optical Design Analysis. Journal of Microelectromechanical Systems. 2026;35(4):689-701. doi:10.1109/jmems.2026.3691968
BibTeX
@article{Islam2026,
author = {Islam, Md Iftekharul and Amnache, Amrid and Beaudry, Richard and Delafosse, Maurice and Ecoffey, Serge and Frechette, Luc G.},
title = {Fabry--Perot Interferometry for Ultraviolet Photolithography Masks: Principle, Proof of Concept, and Optical Design Analysis},
journal = {Journal of Microelectromechanical Systems},
year = {2026},
volume = {35},
number = {4},
pages = {689--701},
doi = {10.1109/jmems.2026.3691968}
}
EUVIMED