EUVIMEDEUVIMED entdecken
Crossref

A second-order optical Butterworth Fabry–Pérot filter

Zeyang Li iD, Abhishek V Karve iD, Xin Wei iD, Jonathan Simon iD

Review of Scientific Instruments · 01.02.2026 · 97 (2)

DOI: 10.1063/5.0307543 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 11.02.2026. Verfasst von Zeyang Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Physics, Stanford University, Stanford, California 94305, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: Office of Naval Research, Urbanek-Chodorow Fellowship.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Filters with flattop passbands are a key enabling technology for signal processing. From communication to sensing, the ability to choose a passband, rather than a single pass frequency, while still efficiently suppressing backgrounds at other frequencies, is a critical capability for ensuring both detection sensitivity and power efficiency. Efficient transmission of a single frequency can be achieved by a single-pole resonator—which in optics is a Fabry–Pérot cavity offering linewidths from kHz to GHz and beyond. Coupling multiple resonators allows for the construction of flattop multi-pole filters. These, although straightforward from RF to THz, where resonators are macroscopic and tunable, are more difficult to control in the optical band and typically realized with dielectric stacks, whose passband widths exceed 100 GHz. Here, we bridge the gap to narrower bandwidth flattop filters by proposing and implementing a second-order Butterworth-type optical filter in a single two-mirror Fabry–Pérot cavity by coupling the two polarization modes. We demonstrate a passband width of 2.68(1) GHz, a maximum stopband suppression of 43 dB, and a passband insertion loss of 2.2(1) dB, with out-of-band power suppression falling as the fourth power of detuning. This approach is viable down to much narrower filters and has the potential to improve high-frequency phase noise performance of lasers, enhance the sensitivity of LIDARs, and provide higher quality narrowband filtering, for example, for Raman spectroscopy.

Autor:innen und Institutionen

  • Department of Applied Physics, Stanford University, Stanford, California 94305, USA.
  • Department of Physics, Stanford University, Stanford, California 94305, USA.

ORCID-Profile: Zeyang Li, Abhishek V Karve, Xin Wei, Jonathan Simon

Förderung

  • Office of Naval Research
  • Urbanek-Chodorow Fellowship

Zitieren

APA

Li, Z., Karve, A. V., Wei, X., & Simon, J. (2026). A second-order optical Butterworth Fabry–Pérot filter. Review of Scientific Instruments, 97(2). https://doi.org/10.1063/5.0307543

Vancouver

Li Z, Karve AV, Wei X, Simon J. A second-order optical Butterworth Fabry–Pérot filter. Review of Scientific Instruments. 2026;97(2). doi:10.1063/5.0307543

BibTeX
@article{Li2026,
  author = {Li, Zeyang and Karve, Abhishek V and Wei, Xin and Simon, Jonathan},
  title = {A second-order optical Butterworth Fabry–Pérot filter},
  journal = {Review of Scientific Instruments},
  year = {2026},
  volume = {97},
  number = {2},
  doi = {10.1063/5.0307543}
}
Kostenlos starten →