Temperature-Compensated Bragg Grating Sensor for Curvature and Strain Measurement in a Configurable Rectangular Optical Fiber
Journal of Lightwave Technology · 15.05.2026 · 44 (10) · 4282-4289
DOI: 10.1109/jlt.2026.3670357 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 15.05.2026. Verfasst von Jingxian Cui und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: RGC Collaborative Research Fund, Photonics Research Institute of The Hong Kong Polytechnic University, Innovation and Technology Commission.
Abstract (Originalsprache)
This work presents a compact fiber Bragg grating (FBG)-based sensor that decouples curvature/strain and temperature effects using a configurable rectangular optical fiber design. The sensor structure integrates a side-hole rectangular fiber (SHRF) with dimension of 175 μm × 358 μm with a 97-μm diameter air hole, along with embedded reduced-cladding fibers (RCFs). It features two FBGs, one inscribed in the SHRF, which is sensitive to both curvature/strain and temperature, and another within an RCF embedded in the air hole, which serves as a temperature reference. The design accommodates both reduced-cladding silica optical fiber (RC-SOF) and reduced-cladding polymer optical fiber (RC-POF), with the RC-POF exhibiting significantly enhanced temperature sensitivity (−43.64 pm/°C in the range 20–80 °C), four times greater than that of the SHRF (11.04 pm/°C), enabling precise thermal discrimination. Experimental results demonstrate a curvature sensitivity of −0.26 nm/m−1, an axial strain sensitivity of 0.89 pm/μϵ, and a bending-induced strain sensitivity of 1.09 pm/μϵ for the SHRF. The embedded RCFs show negligible curvature/strain response, with the RC-SOF exhibiting 10.70 pm/°C sensitivity (50–180 °C). The SHRF's flat cladding enables clear orientation identification and enhances strain transfer/bonding. This all-fiber design provides thermal compensation without requiring complex packaging or separate reference elements.
Förderung
- RGC Collaborative Research Fund
- Photonics Research Institute of The Hong Kong Polytechnic University
- Innovation and Technology Commission
- Hong Kong Baptist University
Zitieren
APA
Cui, J., Htein, L., Leong, C. Y., Lu, L., Gan, S. X., Chew, J. W., Cheng, X., & Tam, H. (2026). Temperature-Compensated Bragg Grating Sensor for Curvature and Strain Measurement in a Configurable Rectangular Optical Fiber. Journal of Lightwave Technology, 44(10), 4282-4289. https://doi.org/10.1109/jlt.2026.3670357
Vancouver
Cui J, Htein L, Leong CY, Lu L, Gan SX, Chew JW, et al. Temperature-Compensated Bragg Grating Sensor for Curvature and Strain Measurement in a Configurable Rectangular Optical Fiber. Journal of Lightwave Technology. 2026;44(10):4282-4289. doi:10.1109/jlt.2026.3670357
BibTeX
@article{Cui2026,
author = {Cui, Jingxian and Htein, Lin and Leong, Chern Yang and Lu, Linyue and Gan, Soon Xin and Chew, Jing Wen and Cheng, Xin and Tam, Hwa-Yaw},
title = {Temperature-Compensated Bragg Grating Sensor for Curvature and Strain Measurement in a Configurable Rectangular Optical Fiber},
journal = {Journal of Lightwave Technology},
year = {2026},
volume = {44},
number = {10},
pages = {4282--4289},
doi = {10.1109/jlt.2026.3670357}
}
EUVIMED