Spatial Stiffness Tuning in Monolithic FDM-Printed TPU Enhances Locomotion in Soft Crawling Robots
IEEE Access · 2026 · 14 · 80174-80183
DOI: 10.1109/access.2026.3697215 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Khalid Meitani und 1 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Soft crawling robots rely on localized anchoring and efficient force transmission to generate net forward motion. However, their performance is often limited by fabrication methods that produce uniformly soft bodies, which limit the ability to introduce localized stiffness required for efficient locomotion. This paper presents a monolithic spatial stiffness tuning approach for soft robots enabled by FDM 3D printing of actively foaming Thermoplastic Polyurethane (TPU), where stiffness is locally programmed by controlling extrusion temperature and flow ratio without multi-material printing or additional fabrication time. To demonstrate this concept, we design and fabricate a novel 3D-printable electromagnetically actuated soft crawling robot that integrates electromagnets and permanent magnets within a TPU body and uses a directional sawtooth friction layer for controlled directional crawling. Four prototypes with different Shore hardness distributions across the body and friction layer were fabricated, ranging from fully soft to fully stiff configurations. Experimental results show that our proposed method can significantly improve locomotion speed, resulting in around 200% increase in maximum speed (130.29 mm/s, 1.3029 Bl/s) compared to a fully soft design (43.29 mm/s, 0.4329 Bl/s), along with improved energetic efficiency (64% reduction in energy per distance). The optimized design was fabricated in an untethered configuration and evaluated experimentally, achieving high-speed locomotion (72.727 mm/s, 0.727 Bl/s), full 360° rotation in around 23 s, and slope climbing up to 15°. Finally, the proposed design is quantitatively compared with prior soft crawling robots, highlighting the performance benefits of monolithic spatial stiffness tuning using foamed TPU in soft robots.
Zitieren
APA
Meitani, K., & Nisar, S. (2026). Spatial Stiffness Tuning in Monolithic FDM-Printed TPU Enhances Locomotion in Soft Crawling Robots. IEEE Access, 14, 80174-80183. https://doi.org/10.1109/access.2026.3697215
Vancouver
Meitani K, Nisar S. Spatial Stiffness Tuning in Monolithic FDM-Printed TPU Enhances Locomotion in Soft Crawling Robots. IEEE Access. 2026;14:80174-80183. doi:10.1109/access.2026.3697215
BibTeX
@article{Meitani2026,
author = {Meitani, Khalid and Nisar, Sajid},
title = {Spatial Stiffness Tuning in Monolithic FDM-Printed TPU Enhances Locomotion in Soft Crawling Robots},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {80174--80183},
doi = {10.1109/access.2026.3697215}
}
EUVIMED