A Hybrid Flying Robot Integrating Water Nozzles and Aerial Propellers: Control System Design and Experimental Studies
IEEE Access · 2026 · 14 · 70224-70235
DOI: 10.1109/access.2026.3687607 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Thien-Dinh Nguyen und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation (NRF), South Korea, National Research Foundation of Korea (NRF) grant, Korean Government [Ministry of Science and Information and Communication Technology (MSIT)].
Abstract (Originalsprache)
This paper presents the design and experimental validation of a robust control system for hybrid-powered robots in forms of autonomous aerial vehicles intended for firefighting and support operations in dangerous and hazardous marine environments. Flight maneuvers are actuated by integrated thrusts from four downward water nozzles and four horizontal propellers. The primary lift is generated by high-pressure water expelled through the former, while the latter aerial propellers provide attitude control and horizontal stabilization, enabling fully controllable flight. The fabrication of the flying robot is first presented. Then, a robust integral sliding mode control (ISMC) strategy is proposed, with an integral term of tracking errors incorporated into the sliding surface, to achieve required flight maneuvers, enhance disturbance rejection and handle system uncertainties. Lyapunov-based analysis guarantees the asymptotic stability of the proposed system. Experimental results in attitude tracking scenarios show that the proposed ISMC provides superior tracking performance in comparison to other controllers, namely conventional sliding mode and proportional-integral-derivative (PID). Therefore, the fabricated robot configuration proves its feasibility, and the proposed control system operates effectively.
Förderung
- National Research Foundation (NRF), South Korea
- National Research Foundation of Korea (NRF) grant
- Korean Government [Ministry of Science and Information and Communication Technology (MSIT)]
Zitieren
APA
Nguyen, T., Dinh, C., Park, J., Huynh, T., & Kim, Y. (2026). A Hybrid Flying Robot Integrating Water Nozzles and Aerial Propellers: Control System Design and Experimental Studies. IEEE Access, 14, 70224-70235. https://doi.org/10.1109/access.2026.3687607
Vancouver
Nguyen T, Dinh C, Park J, Huynh T, Kim Y. A Hybrid Flying Robot Integrating Water Nozzles and Aerial Propellers: Control System Design and Experimental Studies. IEEE Access. 2026;14:70224-70235. doi:10.1109/access.2026.3687607
BibTeX
@article{Nguyen2026,
author = {Nguyen, Thien-Dinh and Dinh, Cao-Tri and Park, Jung-Suk and Huynh, Thinh and Kim, Young-Bok},
title = {A Hybrid Flying Robot Integrating Water Nozzles and Aerial Propellers: Control System Design and Experimental Studies},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {70224--70235},
doi = {10.1109/access.2026.3687607}
}
EUVIMED