Identifying markers of biofilm formation on medical-grade stainless steel as a representative medical device material
Microbiology · 01.04.2026 · 172 (4)
DOI: 10.1099/mic.0.001684 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microbiology, erschienen am 01.04.2026. Verfasst von Gregory G Anderson und 6 weiteren Autor:innen. Beteiligte Einrichtung: Division of Biology, Chemistry, and Materials Science, Center for Devices and Radiological Health (CDRH), Office of Science and Engineering Laborator…. Hauptthemen laut MEDLINE: Biofilms, Stainless Steel, Equipment and Supplies. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Oak Ridge Institute for Science and Education.
Abstract (Originalsprache)
Reusable medical devices are reprocessed between uses, including cleaning and, as necessary, disinfection or sterilization. Healthcare-associated infections have been attributed to reusable medical devices and linked to inadequate reprocessing, which can result in residual soil on the device, insufficient disinfection, microbial resistance to used disinfectants and biofilm-related contamination. These factors can lead to microbial proliferation on and biofouling of reusable medical devices, increasing the risk of patient infection. While there are FDA-recognized standards for cleaning validation (including artificial test soils), there is a lack of standards or guidance documents available to advise on determining whether biofilm has been adequately cleaned off reusable devices after reprocessing. Additionally, relatively few studies report reproducible models of biofilm formation on medical devices or device materials; such models are necessary to begin the identification of the microbial biofilm burden present before and after reprocessing. Moreover, appropriate analytes to quantify that biofilm burden, and the endpoints of those analytes after reprocessing, need to be determined. The study described herein utilized a drip flow reactor (DFR) to develop single-species biofilms of two Gram-negative ( Pseudomonas aeruginosa and Klebsiella pneumoniae ) and two Gram-positive ( Staphylococcus aureus and Enterococcus faecalis ) bacterial species that are prone to contaminate medical devices as biofilms. Biofilm was extracted at early and late biofilm stages and then tested for several analytes, including protein, ATP, endotoxin, peptidoglycan and total organic carbon. The levels of these analytes were compared to c.f.u. and metabolic activity to qualitatively compare analyte levels with biofilm burden. The results presented demonstrate that the DFR can be used to model biofilm formation of several medically relevant micro-organisms on stainless steel. Furthermore, the analytical data obtained with this study indicate that the analytes used can be a good starting point for informing the selection of endpoints in future studies that evaluate the efficacy of cleaning and disinfection within the context of biofilm reduction.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Division of Biology, Chemistry, and Materials Science, Center for Devices and Radiological Health (CDRH), Office of Science and Engineering Laboratories, US Food and Drug Administration (FDA), Silver Spring, MD 20993, U…
- Division of Health IB, CDRH, Office of Product Evaluation and Quality, Office of Health Technology I, FDA, Silver Spring, MD 20993, USA.
Förderung
- Oak Ridge Institute for Science and Education
Zitieren
APA
Anderson, G. G., Kovvali, S., Dang, F. W., Singh, R. M., Vishwakarma, A., Weeks, J. W., & Pandey, R. (2026). Identifying markers of biofilm formation on medical-grade stainless steel as a representative medical device material. Microbiology, 172(4). https://doi.org/10.1099/mic.0.001684
Vancouver
Anderson GG, Kovvali S, Dang FW, Singh RM, Vishwakarma A, Weeks JW, et al. Identifying markers of biofilm formation on medical-grade stainless steel as a representative medical device material. Microbiology. 2026;172(4). doi:10.1099/mic.0.001684
BibTeX
@article{Anderson2026,
author = {Anderson, Gregory G and Kovvali, Sravya and Dang, Francis W and Singh, Ryan M and Vishwakarma, Apoorva and Weeks, Jon W and Pandey, Ruchi},
title = {Identifying markers of biofilm formation on medical-grade stainless steel as a representative medical device material},
journal = {Microbiology},
year = {2026},
volume = {172},
number = {4},
doi = {10.1099/mic.0.001684}
}
EUVIMED