Impact of surface roughness on the effectiveness of commercial disinfectants against wet biofilms
Journal of Applied Microbiology · 2025
DOI: 10.1093/jambio/lxaf263 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Microbiology, 2025. Verfasst von Kayley Stallings und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biological Sciences, Clemson University, Clemson, SC 29634, United States. Hauptthemen laut MEDLINE: Biofilms, Staphylococcus aureus, Disinfectants, Pseudomonas aeruginosa. Die Arbeit nennt 30 Literaturangaben. Gefördert von: Diversey-A Solenis Company, Fort Mill SC, Diversey—A Solenis Company, Fort Mill SC.
Abstract (Originalsprache)
Aims
A standardized approach to mimic real-world surface wear is critical for assessing disinfection performance in practical applications. This study developed a reproducible method to simulate surface damage and evaluate its effect on disinfectant efficacy. Methods and results First, we developed a novel and reproducible method to standardize surface scratching and simulate worn surface roughness. This was achieved by modifying a Sutherland Rub Tester® with sandpaper, calibrated weight, and controlled abrasion cycles, allowing consistent replication of surface damage for experimental evaluation. Second, we adapted a standardized EPA method to compare disinfection efficacy against Pseudomonas aeruginosa and Staphylococcus aureus biofilms on scratched and nonscratched stainless steel (SS) and high-density polyethylene (HDPE) coupons, treated with three disinfectant products: hypochlorite (CL), hydrogen peroxide (HP), and quaternary ammonium (QA). Surface roughness increased by 0.82 µm (SS) and 12.69 µm (HDPE) after 80-grit sandpaper treatment. Biofilm reductions following three disinfectant treatments ranged from 3.23 to 6.22 logs (P. aeruginosa) and 2.92–5.62 logs (S. aureus) for all coupon types, with surface roughness having no significant impact on disinfection efficacy. A 6-log reduction was achieved only with CL against P. aeruginosa on nonscratched HDPE.
Conclusion
This study developed a reproducible surface-scratching method and found that biofilm disinfection was affected by bacteria, surface material, and disinfectants.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Biological Sciences, Clemson University, Clemson, SC 29634, United States.
- Diversey-A Solenis Company, Fort Mill, SC 29708, United States.
- Department of Food, Nutrition and Packaging Sciences, Clemson University, Clemson, SC 29634, United States.
Förderung
- Diversey-A Solenis Company, Fort Mill SC
- Diversey—A Solenis Company, Fort Mill SC
Zitieren
APA
Stallings, K., Buckley, D., Teska, P., & Jiang, X. (2025). Impact of surface roughness on the effectiveness of commercial disinfectants against wet biofilms. Journal of Applied Microbiology. https://doi.org/10.1093/jambio/lxaf263
Vancouver
Stallings K, Buckley D, Teska P, Jiang X. Impact of surface roughness on the effectiveness of commercial disinfectants against wet biofilms. Journal of Applied Microbiology. 2025. doi:10.1093/jambio/lxaf263
BibTeX
@article{Stallings2025,
author = {Stallings, Kayley and Buckley, David and Teska, Peter and Jiang, Xiuping},
title = {Impact of surface roughness on the effectiveness of commercial disinfectants against wet biofilms},
journal = {Journal of Applied Microbiology},
year = {2025},
doi = {10.1093/jambio/lxaf263}
}
EUVIMED