A frugal automated contact angle analyser for low-cost surface wettability characterization
Royal Society Open Science · 04.11.2026 · 13 (11)
DOI: 10.1098/rsos.261464 ↗Kurz gefasst
Fachartikel in der Zeitschrift Royal Society Open Science, online erschienen am 04.11.2026. Verfasst von Rodrigo G Martins Coelho und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, University of Leicester, Leicester LE1 7RH, UK. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Society.
Abstract (Originalsprache)
Contact angle measurement is a fundamental technique for evaluating surface wettability in materials science, biomedical engineering and coating technologies. However, the high cost of commercial contact angle analysers limits access to surface characterization, particularly in resource-limited laboratories. This study presents a low-cost automated contact angle analyser developed using frugal engineering principles and open-source hardware. The system integrates Arduino-based control, NEMA 17 stepper-motor actuation, automated microdroplet dispensing, smartphone-based optical imaging and a 3D-printed polylactic acid (PLA) framework. A calibrated 330-step dispensing cycle generated reproducible 5 μl water droplets, with fixed optical alignment minimized operator variability. Wettability measurements were performed on polytetrafluoroethylene (PTFE), polyvinyl chloride (PVC) and aluminium substrates and analysed using ImageJ. Mean contact angles were 108.5° for PTFE, 73.9° for PVC and 85.8° for aluminium, closely matching published literature values. One-way analysis of variance (ANOVA) demonstrated significant differences between substrates (p < 0.001), with measurement variability of ±2.3° indicated good repeatability. The total fabrication cost was £114.26, representing approximately 99% cost reduction compared with commercial instruments. The proposed platform demonstrates that automated, reproducible surface wettability characterization can be achieved using low-cost, open-source instrumentation, providing an accessible solution for research, education and engineering laboratories while broadening access to advanced materials characterization.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering, University of Leicester, Leicester LE1 7RH, UK.
- Institute of Research and Development, Duy Tan University, Da Nang, Vietnam.
- School of Engineering & Technology, Duy Tan University, Da Nang, Vietnam.
- Biomedical Engineering Research Group, School of Engineering, University of Leicester, Leicester LE1 7RH, UK.
ORCID-Profile: Saravana Kumar Jaganathan
Förderung
- Royal Society
Zitieren
APA
Martins Coelho, R. G., Truman, A., & Jaganathan, S. K. (2026). A frugal automated contact angle analyser for low-cost surface wettability characterization. Royal Society Open Science, 13(11). https://doi.org/10.1098/rsos.261464
Vancouver
Martins Coelho RG, Truman A, Jaganathan SK. A frugal automated contact angle analyser for low-cost surface wettability characterization. Royal Society Open Science. 2026;13(11). doi:10.1098/rsos.261464
BibTeX
@article{MartinsCoelho2026,
author = {Martins Coelho, Rodrigo G and Truman, Andy and Jaganathan, Saravana Kumar},
title = {A frugal automated contact angle analyser for low-cost surface wettability characterization},
journal = {Royal Society Open Science},
year = {2026},
volume = {13},
number = {11},
doi = {10.1098/rsos.261464}
}
EUVIMED