EUVIMEDEUVIMED entdecken
Crossref

Developing new high-temperature shielding materials for neutron radiation protection

Bünyamin Aygün iD, Turgay Korkut, Eren Urtekin, Mansur Albayrak, M I Sayyed, Abdulhalik Karabulut

Radiation Protection Dosimetry · 2025

DOI: 10.1093/rpd/ncaf148 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Radiation Protection Dosimetry, 2025. Verfasst von Bünyamin Aygün und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronics and Automation, Vocational School, Agri Ibrahim Cecen University, 04000 Agri, Türkiye. Hauptthemen laut MEDLINE: Radiation Protection, Neutrons, Construction Materials. Die Arbeit nennt 37 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, neutron shields based on hydraulic lime-based brick samples were fabricated by adding various mass additive materials in proportions such as lime (CaCO3), titanium oxide (TiO2), hematite (Fe2O3), aluminum oxide (Al2O3), calcium sulfate (CaSO4), silicon dioxide (SiO2), and boron carbide (B4C). Neutron attenuation factors such as neutron transmission factor, half-value layer, effective removal cross-section ΣR (cm−1), mean free path, and neutron flux were determined theoretically using Monte Carlo simulation GEANT4 and Fluka codes. Fast neutron absorption dose rate experiments were performed using a 241Am-Be source and a BF3 gaseous proportional detector. In addition, the absorbed dose values were theoretically determined using the Fluka code. All the obtained data were compared with the results of the examined reference samples (conventional concrete, some heavy concretes, and paraffin). All new brick materials were detected to have superior shielding capacities compared to the reference material. The proposed brick samples can be used as an alternative radiation protection material for regular shielding materials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Radiation ProtectionNeutronsConstruction MaterialsMonte Carlo MethodHumansRadiation DosageMaterials TestingHot TemperatureAmericiumOxidesBeryllium

Substanzen

AmericiumOxidesBerylliumAmericium-241

Autor:innen und Institutionen

  • Department of Electronics and Automation, Vocational School, Agri Ibrahim Cecen University, 04000 Agri, Türkiye.
  • Department of Nuclear Engineering, Faculty of Engineering, Sinop University, 57000 Sinop, Türkiye.
  • Department of Health Services, Medical Services and Techniques, Audiometry, Vocational School Avrasya University, 61000 Trabzon, Türkiye.
  • Department of Electrical and Energy /Nuclear Technology and Radiation Safety, Vocational School, Agri Ibrahim Cecen University, 04000 Agri, Türkiye.
  • Department of Physics, Faculty of Science, Isra University, 11118 Amman, Jordan.
  • Department of Physics, Dogus University, Dudullu-Ümraniye, 34775 Istanbul, Türkiye.

ORCID-Profile: Bünyamin Aygün

Zitieren

APA

Aygün, B., Korkut, T., Urtekin, E., Albayrak, M., Sayyed, M. I., & Karabulut, A. (2025). Developing new high-temperature shielding materials for neutron radiation protection. Radiation Protection Dosimetry. https://doi.org/10.1093/rpd/ncaf148

Vancouver

Aygün B, Korkut T, Urtekin E, Albayrak M, Sayyed MI, Karabulut A. Developing new high-temperature shielding materials for neutron radiation protection. Radiation Protection Dosimetry. 2025. doi:10.1093/rpd/ncaf148

BibTeX
@article{Aygn2025,
  author = {Aygün, Bünyamin and Korkut, Turgay and Urtekin, Eren and Albayrak, Mansur and Sayyed, M I and Karabulut, Abdulhalik},
  title = {Developing new high-temperature shielding materials for neutron radiation protection},
  journal = {Radiation Protection Dosimetry},
  year = {2025},
  doi = {10.1093/rpd/ncaf148}
}
Kostenlos starten →