Methodology for shielding design and evaluation for container scanners
Radiation Protection Dosimetry · 2024
DOI: 10.1093/rpd/ncae020 ↗Kurz gefasst
Fachartikel in der Zeitschrift Radiation Protection Dosimetry, 2024. Verfasst von Thokchom D Singh und 5 weiteren Autor:innen. Beteiligte Einrichtung: Radiation Applications Safety Division, Atomic Energy Regulatory Board, Anushaktinagar-400094, Mumbai, India. Hauptthemen laut MEDLINE: Radiation Protection, Equipment Design. Die Arbeit nennt 10 Literaturangaben.
Abstract (Originalsprache)
There has been an increase in the use of high energy photon beam for container scanners in many countries for multi purposes such as detecting high atomic number materials which might be nuclear materials, drugs, high explosive materials and other contrabands etc. High energy photon beams generally 6 and 9 MV can be used for scanning such materials. However, it is important to ensure that radiation level beyond the container scanner installation is within the permissible dose limit specified by the national competent authority for the protection of public and radiation workers. In this paper, challenges in the biological shielding during the installation of high energy X-ray system for scanning vehicles containing suspected materials are discussed. The purpose of the present study is to develop a methodology for shielding design and evaluation for container scanner installations. The basic concept pertaining to shielding evaluation of radiotherapy installations provided in National Council on Radiation Protection and Measurements (NCRP)/International Atomic Energy Agency (IAEA) reports are referred, and appropriately used to calculate optimized shielding thicknesses requirements for container scanner installation. Workload is estimated based on number of containers scanned, machine ON time and dose rate at 1 m. The shielding evaluation includes use of beam stopper in the primary beam, scattering by heterogeneous metallic scrap materials or any other suspected materials contained in the vehicle and their impact on the thickness of shielding walls. A model lay out plan to be used for installation of container scanner is developed. A methodology for shielding evaluation for various protective walls and ceiling of this model is also discussed. The study provides basic requirement for designing a structural room for installing 9MV container scanner from radiological safety view point.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Radiation Applications Safety Division, Atomic Energy Regulatory Board, Anushaktinagar-400094, Mumbai, India.
ORCID-Profile: Thokchom D Singh
Zitieren
APA
Singh, T. D., Sha, R. L., Singh, R. K., Sahani, G., Tandon, P., & Sharma, P. K. D. (2024). Methodology for shielding design and evaluation for container scanners. Radiation Protection Dosimetry. https://doi.org/10.1093/rpd/ncae020
Vancouver
Singh TD, Sha RL, Singh RK, Sahani G, Tandon P, Sharma PKD. Methodology for shielding design and evaluation for container scanners. Radiation Protection Dosimetry. 2024. doi:10.1093/rpd/ncae020
BibTeX
@article{Singh2024,
author = {Singh, Thokchom D and Sha, Rajib L and Singh, Ranjankumar K and Sahani, Ghanshyam and Tandon, Pankaj and Sharma, Pankaj Kumar Dash},
title = {Methodology for shielding design and evaluation for container scanners},
journal = {Radiation Protection Dosimetry},
year = {2024},
doi = {10.1093/rpd/ncae020}
}
EUVIMED