EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design, fabrication and clinical characterization of additively manufactured tantalum hip joint prosthesis

Dewei Zhao iD, Liangliang Cheng, Faqiang Lu, Xiuzhi Zhang, Jiawei Ying, Xiaowei Wei, Fang Cao, Chunxiao Ran, Guoshuang Zheng, Ge Liu, Pinqiao Yi, Haiyao Wang und 6 weitere

Regenerative Biomaterials · 02.01.2024 · 11

DOI: 10.1093/rb/rbae057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Regenerative Biomaterials, online erschienen am 03.06.2024. Verfasst von Dewei Zhao und 17 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics, Affiliated Zhongshan Hospital of Dalian University, Dalian 116001, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, LiaoNing Revitalization Talents Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The joint prosthesis plays a vital role in the outcome of total hip arthroplasty. The key factors that determine the performance of joint prostheses are the materials used and the structural design of the prosthesis. This study aimed to fabricate a porous tantalum (Ta) hip prosthesis using selective laser melting (SLM) technology. The feasibility of SLM Ta use in hip prosthesis was verified by studying its chemical composition, metallographic structure and mechanical properties. In vitro experiments proved that SLM Ta exhibited better biological activities in promoting osteogenesis and inhibiting inflammation than SLM Ti6Al4V. Then, the topological optimization design of the femoral stem of the SLM Ta hip prosthesis was carried out by finite element simulation, and the fatigue performance of the optimized prosthesis was tested to verify the biomechanical safety of the prosthesis. A porous Ta acetabulum cup was also designed and fabricated using SLM. Its mechanical properties were then studied. Finally, clinical trials were conducted to verify the clinical efficacy of the SLM Ta hip prosthesis. The porous structure could reduce the weight of the prosthesis and stress shielding and avoid bone resorption around the prosthesis. In addition, anti-infection drugs can also be loaded into the pores for infection treatment. The acetabular cup can be custom-designed based on the severity of bone loss on the acetabular side, and the integrated acetabular cup can repair the acetabular bone defect while achieving the function of the acetabular cup.

Schlagwörter

Stichwörter der Autor:innen

anti-infectionhip joint prosthesisporous Taselective laser meltingtopology optimization

Autor:innen und Institutionen

  • Department of Orthopaedics, Affiliated Zhongshan Hospital of Dalian University, Dalian 116001, China.

ORCID-Profile: Dewei Zhao

Förderung

  • National Natural Science Foundation of China
  • LiaoNing Revitalization Talents Program

Zitieren

APA

Zhao, D., Cheng, L., Lu, F., Zhang, X., Ying, J., Wei, X., Cao, F., Ran, C., Zheng, G., Liu, G., Yi, P., Wang, H., Song, L., Wu, B., Liu, L., Li, L., Wang, X., & Li, J. (2024). Design, fabrication and clinical characterization of additively manufactured tantalum hip joint prosthesis. Regenerative Biomaterials, 11. https://doi.org/10.1093/rb/rbae057

Vancouver

Zhao D, Cheng L, Lu F, Zhang X, Ying J, Wei X, et al. Design, fabrication and clinical characterization of additively manufactured tantalum hip joint prosthesis. Regenerative Biomaterials. 2024;11. doi:10.1093/rb/rbae057

BibTeX
@article{Zhao2024,
  author = {Zhao, Dewei and Cheng, Liangliang and Lu, Faqiang and Zhang, Xiuzhi and Ying, Jiawei and Wei, Xiaowei and Cao, Fang and Ran, Chunxiao and Zheng, Guoshuang and Liu, Ge and Yi, Pinqiao and Wang, Haiyao and Song, Liqun and Wu, Bin and Liu, Lingpeng and Li, Lu and Wang, Xiaohu and Li, Junlei},
  title = {Design, fabrication and clinical characterization of additively manufactured tantalum hip joint prosthesis},
  journal = {Regenerative Biomaterials},
  year = {2024},
  volume = {11},
  doi = {10.1093/rb/rbae057}
}
Kostenlos starten →